Top 20 Acer Aspire 5610-4648 Notebook Questions & Answers

check your flash settings. You need to allow flash to access your camera. Right click in the black camera picture and check the box to allow permission for camera

so are you asking why is it not reading it automatically or that it does not read the card? check to make sure the 4Gb SD card is formatted properly so that Vista can in fact read it. hope this helps.

check your region and language; try setting it for a country that speaks English and then take a look, make sure the interface is installed in English, the drivers could be in any language but I do not think this has nothing to do with the interface.

right click anywhere and the screen to pull up the display menu. Change the resolution settings to the highest number

It's not in your Pictures document folder?

To Start go into My Computer Right Click on your Optical drive and click Eject and see if the tray opens if it opens it's powered and might have some foreign material blocking if so clear using some canned air it if not and the tray cannot be ejected using the computer then you can get a new Optical Tray or DVD reader/writer and it might be easier and or cost affected having a repair shop replace it for you Depending on your skill set I have changed them before I bought it from Amazon and installed it in about 50 minutes its costs $35.00

use the permanent delete hold shift and press delete at the same time

try : microsoft fix it

Sounds like your laptop is overheating. Its a safety feature for it to not turn on when too hot. Normally this will be caused by dust, or dirt and grime blocking air filters. If you take it apart and give it a good clean, this will most likely solve your problem

Please check the solution here: 1) Find or make an XP install with SATA set to IDE mode 2) Install .NET 2.0 & Intel SSD Toolbox 3) Shut down 4) Connect up your 'bricked' Intel SSD 5) Turn on system 6) Start Intel SSD Toolbox, and the SSD should now show up 7) Start another secure erase on it, and it should go through 8) Your Intel SSD is now unlocked again http://forum.notebookreview.com/threads/how-to-resurrect-an-intel-ssd-locked-by-the-intel-ssd-toolbox.583269 You might also want to follow this Microsoft KB - You receive Stop 0x0000007B error after you move the Windows XP system... And for some background info - https://ata.wiki.kernel.org/index.php/ATA_Secure_Erase Hope that helps! Peace

Did you input the password with capitals? If you can't get in try going into your admin account. Most people haven't put a password on this account and it should open up and you can create a new account and switch users and retrieve info from your old account.Computer stores can usually reset your motherboard so you can get into your account.

To get your computer faster try deleting apps you don't use and obtain a scanner to delete items you don't need.I have an app to check my security,malware,registrys,This app is free called Yet Another Cleaner.On the internet,hope this helps.

Sounds like somebody put a nasty virus on your Pc known as Windows 8. Ha just kidding but it is lousy. I run Linux Mint so I don't have to deal with such junk. At the Microsoft Community others are talking about your issue , maybe you can get some answers there. Good Luck. want to disable the charm screen from popups

Remove the CMOS battery if able. Some newer laptops it is actually soldiered to the board so you can't remove it. If this is the case there should be 2 small holes someplace in the back cover to where it can be crossed over by using a very small piece of wire.

On the DVD drive door there is a very small rectangular push button. It is about 5/32 inch wide by 3/8 inch long. it may take several several attempts at pushing the button but it should open the drive. If it does not open up the My Computer icon of your computer and left click on the DVD icon. When the drop down box appears select eject and right click on it. That should open your drive. I hope info this helps you.

you can go to control panel and find display setting, however your screen size somehow can be limited depends on manufacturer. the standard size somehow can be 1024x768 and below, if you cannot find it maybe the setting is limited to certain sizes. else, get a new monitor or LED TV.

Could be the camera eye has failed, the drivers are corrupted, the wires to the camera are broken, the program using the camera is corrupted or maybe a system file is missing. Just guessing here. I keep tape over my cameras.

try taken out the small battery from inside the laptop leave out for a couple of mins the put back,it might work.

Follow below steps : http://www.tech-faq.com/how-do-i-reset-an-acer-bios-password.html

Check the power connections. Also visit this site Service Support Acer Official Site