Top 20 Hitachi 50HDA39 50 in. Plasma HDTV Questions & Answers

0helpful
1answer

Tv doesn't connect though coaxial hook up

Most of these TVs show a blank screen unless they are receiving a sinal?
1/28/2014 3:54:05 AM • Hitachi 50HDA39... • 151 views • 0 helpful votes
0helpful
1answer

Hitachi 50HDA39 Plasma Burnout

If you wish to get some details, check the site linked here. Pull up older posts. Check the site in 'Mosaic' view. It will make search easy. http://electronicshelponline.blogspot.com/ Troubleshooting procedure to many popular brand TVs are given. Surf the site with patience.
1/19/2014 6:47:35 PM • Hitachi 50HDA39... • 181 views • 0 helpful votes
1helpful
1answer

My 50Hda39 50 in plasma doesn't work through the coaxial cable hook up

Please contact the authrized service center for Hitachi. Sounds like corrupted firmware. Firmware update is necessary, and the firmware to Hitachi is very difficult to get by internet. If you wish to get some details, check the site linked here. Surf the site in "MOSAIC" view. It will make surf easy. Surf the site with patience. http://electronicshelponline.blogspot.com/
1/26/2014 5:20:09 AM • Hitachi 50HDA39... • 134 views • 1 helpful votes
0helpful
1answer

What Parts Possibly??

If you wish to get some details, check the site linked here. Pull up older posts. Check the site in 'Mosaic' view. It will make search easy. http://electronicshelponline.blogspot.com/
1/19/2014 9:07:21 PM • Hitachi 50HDA39... • 33 views • 0 helpful votes
0helpful
1answer

Was watching my 50HDA39 Hitachi tv when the sound went, tried everything , what do you suggest ?

Two simple things:See in menu if for some reason the set has the speakers switched to off or external.Also see if you have sound when connected to a rear audio/video input with a DVD etc.
12/21/2012 7:22:35 PM • Hitachi 50HDA39... • 69 views • 0 helpful votes
0helpful
1answer

Watching TV and all of a sudden a loud pop came from the back of the set. Doesn't turn back on after unplugging.

HelloCheck its power supply regulator board. The pop sound you heard may be due to an explosion to any electrolytic capcitors on it. If the line voltage exceeds, this fault will happen. just repalce the damaged component. It is best to replace this board as card basis.
3/19/2012 2:51:30 PM • Hitachi 50HDA39... • 463 views • 0 helpful votes
1helpful
2answers

Audio no picture

xsus panel usually
2/15/2010 2:10:58 AM • Hitachi 50HDA39... • 280 views • 1 helpful votes
0helpful
1answer

Do u have code for a woolworths multi remote for a

try these,
004,011,017,020,024,028,034,042,045,046
047,048,049,050,086,119,124,132,133,139,140,141
142,143,145,186,224
that's all the Hitachi codes listed for woolworths universal remote i have.
8/2/2009 3:11:28 PM • Hitachi 50HDA39... • 371 views • 0 helpful votes
0helpful
1answer

Red static in black background ~ thin line running down center

Robjrpena,

Did you find a solution to your "red dot" problem? I'm having the same issue :(

Thanks John
6/17/2009 10:42:49 PM • Hitachi 50HDA39... • 748 views • 0 helpful votes
0helpful
6answers

HDMI inputs went out. other inputs still work

Check your hdmi cables and their connectors.

You possibly have a faulty connector either on the cable or on the tv or the board is faulty.

Hows the warranty?
1/7/2009 5:23:26 PM • Hitachi 50HDA39... • 136 views • 0 helpful votes
0helpful
2answers

Universal Remote iwave

I Have The Codes,But No instructions!! Big IWave . 0054-Philips Hitachi-0145 JVC-0053 LG- 0178 OR 1265
6/9/2008 3:53:46 PM • Hitachi 50HDA39... • 901 views • 0 helpful votes
0helpful
1answer

Hitachi tv shuts off . When I turn on the TV iMessage says please wait then turns off two seconds later.

That sounds like it is not booting properly. I would check for correct power supply opperation and if not that, look for a software reloading procedure in the user instruction manual.
2/10/2024 2:53:23 PM • Hitachi... • 23 views • 0 helpful votes
0helpful
1answer

HI MY NAME IS MAZEN FAHMY I haVE DIODE T3D 36 THIS ZENER & DIODE 2 AND THIS IS IN DATA SHOW HITACHI CP-X3030WN FIX POWER.

https://www.google.com/search?q=DIODE+T3D+36 https://www.google.com/search?q=HITACHI+CP-X3030WN

Original Projector Ballast Main Power Supply For Hitachi ...

AliExpress https://www.aliexpress.com > item Original Projector Ballast Main Power Supply For Hitachi CP-X3030WN. 1/1. 1. US $52.62. Price shown before tax. Free shipping?Free returns. Original Projector ... US$52.62

Projector Power supply For CP-X2530WN CP-X3030WN ...

AliExpress https://m.aliexpress.com > item Projector Lamp Ballast And Power Supply For Hitachi CP-X2530WN. US $80. Projector Lamp Ballast And Power Supply For Hitachi CP-X2530WN. EUC 215g N/T05 ... US$50.00

CP-X2530WN/CP-X3030WN CP-WX3030WN

Projector Central https://www.projectorcentral.com > pdf > projecto... power supply make the projector turn on. Setting up. ?This product is also designed for IT power systems with a phase-to- phase voltage of 220 to 240 V ... 118 pages ....
12/4/2023 4:41:24 PM • Hitachi... • 30 views • 0 helpful votes
0helpful
1answer

Change input on Hitachi LCD TV model LE65K6R9 without remote?

I'd unplug/disconnect the Roku and after 30 seconds try the control button on the back. If you can change the input do so, then plug the Roku back in. Until you use the input button on the back to change input to Roku, you should be able to use the other buttons on the back to control the TV. If this does not work, unplug both the TV and the Roku. Wait maybe a minute, then plug the TV back in and follow the above instructions. Here are other alternatives: Using physical buttons: You can find the physical buttons on the left or right back side of the Hitachi TV. Using these keys, you can change the input, adjust the volume, or turn on Hitachi TV without a remote. Press the Input button located at the back or side of the Hitachi TV. The list of connected sources will appear on the TV screen12. Using external devices: Connect a wireless keyboard or mouse to your Hitachi TV and change the input1. Buy a universal remote: You can buy a universal remote to control your Hitachi TV and change the source.
10/13/2023 6:39:10 PM • Hitachi... • 57 views • 0 helpful votes
2helpful
1answer

How to remove small popup bottom left of Hitachi smart tv screen.

A little popup that appears in the lower left corner of your Hitachi smart TV screen may be related to one of the TV's settings or capabilities. You can attempt the following actions to get rid of it: 1.Investigate notifications: Smart TVs occasionally show notifications for different events or upgrades. If there are any notifications, look for them and then clear them by following the on-screen directions. 2.Applications and Inputs: Make sure all programmes and inputs are closed. The popup may occasionally be connected to an input source or app, which can be closed to get rid of it. 3.On-Screen Display (OSD) Off: There might be an OSD option in the settings menu on Hitachi TVs. Try disabling OSD or changing its settings to see if it gets rid of the popup. Verify any software/firmware updates: 4.Make that the most recent firmware or software upgrades are installed on your TV. Pop-up windows may appear as a result of faults in outdated software. Look for a software update option in the TV's settings menu. 5.Firmware Reset: You can conduct a factory reset on your TV if the problem persists after you've tried various troubleshooting measures. The default values for all settings will be restored as a result. Make cautious to back up any crucial data before doing a factory reset because doing so will also remove any customised settings and data. 6.Message Hitachi Support here: If none of the aforementioned fixes the problem, it's a good idea to get in touch with Hitachi customer service or refer to the TV's user manual for detailed instructions on how to get rid of the popup. Regarding External Devices: 7.The popup may be related to any external devices you have connected to your TV, like a cable box or game console. Make sure that these gadgets are operating properly and that the settings have been changed as necessary. Keep in mind that depending on the type and software version of your Hitachi smart TV, the precise processes and options may change. For instructions unique to your TV model, consult the user manual, or go to the Hitachi website for further help options.
9/30/2023 1:32:58 PM • Hitachi... • 64 views • 2 helpful votes
0helpful
1answer

Hitachi LE42S704 none of the HDMI ports work, need to update (i think)

Are you getting the various HDMI inputs on the screen but it acts like nothing is connected? We have repaired hundreds of TV's with no HDMI signal over the years and have never had an update correct this issue. There is an IC close to the HDMI input jacks (U501) that decodes the data, that's always been the defective part. You can order the part and change it but you will need advanced soldering skills and the equipment to do it, I'd recommend replacing the main board if you can find one.
5/21/2023 11:04:17 PM • Hitachi... • 59 views • 0 helpful votes
0helpful
1answer

I bought a Hitachi (L22DG07U) 22 Inch LED LCD DVD Combi TV everything else works perfectly except the fact that the DVD doesn't talk but the TV talk well, what do I do?

Take it in for repair unless you are a DVD repair person. The only thing you can try is a DVD Cleaning disc. You don't say what it does or doesn't do except it 'doesn't talk'. Well it isn't supposed to talk, it should play DVDs :>D Only Smart televisions have Bluetooth. Here is your manual, you could attach an external DVD if you can find one that has a SCART connector. https://www.manualslib.com/manual/466636/Hitachi-L22dg07u.html?page=12#manual It is 11 years old according to the review, and it get 6/10. https://www.avforums.com/reviews/hitachi-l22dg07u-22-inch-led-lcd-dvd-combi-tv-review.360/#:~:text=The%20energy%20efficiency%20is%20excellent,music%20via%20the%20USB%20port. ..
4/26/2023 8:04:44 PM • Hitachi... • 39 views • 0 helpful votes
0helpful
1answer

Hitachi tv black screen ?

but nothing else If your Hitachi television has sound but a black screen, it is likely that either the bulb or the inverter has gone bad. The inverter is a part of the backlight system. If the inverter is not functioning, the backlight will not work and the television will be dark. You should check to see if the bulb needs to be replaced first. If the bulb is working and the inverter doesn't turn on, then you may need to have a technician take a look at the television.
1/6/2023 2:11:14 PM • Hitachi... • 234 views • 0 helpful votes
0helpful
1answer

HITACHI AX-M71 MUSIC SYSTEM REMOTE

1/23/2023 8:31:15 PM • Hitachi... • 84 views • 0 helpful votes
0helpful
1answer

8.5tr ductable hitachi in remote red light blinking continues what the reason

count the blinks and refer it from user manual trouble shoot section , you will find the reason
1/18/2023 9:49:07 AM • Hitachi... • 92 views • 0 helpful votes
Not finding what you are looking for?
Hitachi 50HDA39 50 in. Plasma HDTV Logo

30 questions posted

Ask a Question

Usually answered in minutes!

Top Hitachi Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

matt martin
matt martin

Level 3 Expert

1259 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Hitachi Televison & Video

  • Hitachi Televison & Video

Most Popular Question

50hda39 50 in plasma doesnt work coaxial

  • Televison & Video
Loading...