20 Most Recent Sylvania LC320SS8 32 in. LCD Television - Page 8 Questions & Answers

you should be able to get one from Funai they made your set and they have a good website or try mr remote

Log onto www.directtv.com and click on equiptment at the top righthand side of the page,then click on remotes,mid page on the right says "program your remote" just below that click on "look up instructions" scroll down to "program your Direct TV remote control" and click on it,click on the model# of your remote control,enter your TV brand in the box and just continue to follow the instructions. Good luck !

The problem will more likely the failed backlight inverter board, Check to see if you do have 5v, 12v, and 24vdc from the power supply, if you do, then it will be inverte board.
Parts: http://www.shopjimmy.com/catalogsearch/result/index/?q=LC320SS8&stock=all

Is this the style of Moxi remote that you have?
If so try these steps to find your TV
1. Turn on the power to your TV.
2. Press and hold down the MOXI and OK buttons.at the same time until the LED at the top blinks twice.
3. Press the numbers 9910 on the remote and the led should blink twice again.
4. Press the mute button. If the TV mutes then press OK to lock in the code. If the TV does not mute press the up arrow once then press mute and continue to press the up arrow once then press mute until the TV mutes once the TV mutes press the OK button to lock in the code.
*** Note this may take a couple minutes of trying to cycle through the code list to find which one will work with your TV *****

Good Luck...

your dvd mech assy will need to be replaced , but could be just a missed aligned deck I would have a tech give you and estimate

They go away after 10 minutes of what? **** She Wrote? Dancing with the Stars? Or simply being powered On? You have some cold solder joints on one of the PCB boards. Once they heat up they work perfectly. The only way to fix this is to have them reflowed by a tech with a soldering tool or have the board replaced. Good luck! Cheers

I am having the same problem with the dish remote on my Sylvania ... need code for sylvania tv that works for dish network remotes

More likely to be either shorted out bridge rectifier or MOSFET in the primary circuits of the power supply. You need to Ohm out those parts.
Parts: http://www.shopjimmy.com/catalogsearch/result/?q=Sylvania+LC320SS8+

try this website:

http://tech.dishnetwork.com/departmental_content/techportal/content/tech/remotes/TechRemo5.3Code.shtml

good luck.

go to any Best Buy and purchase a universal wall mount they are all labeled for what they are made for EX size of tv

one of the balist transformers has failed unplug all but one and try set if you see the lamp lihg for a second unplug that one and got to the next when you find the lamp that does not light that is your bad part Funai whole makes your set has them in stock 24 dollars

This sounds like an impact injury to the screen itself. It is likely that something may have hit the screen or if the set is old, the part inside may be starting to go.

Hope this helps

It could be your inverter board

yes. Look for a vesa qualified wall mount.

Download the user manul of the remote you have, if the codes for the TV do not work, you will have to use 'search for your code' function.
http://www.comcast.com/corporate/customers/customer_support/remotes.html

The green blinks are an error code indicating a specific fault, your power supply developed an 'over-voltage' issue and needs to be serviced at your local repair shop.......

If the Red Light Blinks twice and goes out, the TV is in Protection Mode. There are 6 voltage outputs to the lamps around the screen. If one of those outputs is missing the TV will sense that there's a problem and refuse to turn on. The predominant failure in this model are the output transformers on the Inverter board. A properly trained technician can measure the windings on each transformer and look for an open circuit, if one is found, replace that Transformer. i was given one of these sets from a friend and I replaced an output transformer ($11 w/shipping) and I now have a fully functional TV/DVD Combo. Also verify that all of the connecting cables internally are properly seated, there have been reports or the ribbon cables from the Power supply board to the main board above it not being fully inserted and it also prevented the TV from turning on. A word of caution. There are VERY High Voltages on the inverter circuit board, only persons with proper training and knowledge should attempt this repair.

I have also had similar problems with the remote using Direct TV functions.
It was necessary for me to contact Direct TV in order to interface to one remote.
I ended up purchasing a aftermarket remote that I could use on both but still have issues with the interfacing of other component's.
However, Direct TV may have other solutions for you.
Hope you are abe to overcome the hassle. !
Hope this helps you, Please rate.....