20 Most Recent HP LaserJet P2015dn Printer - Page 2 Questions & Answers

Hi sometimes just some of the printer drivers are with "bugs" like this one. If you are using Win 7 or newer ver. please don't let the operation system to install drivers for this printer. Download drivers from www.hp.com and install it manual. Try different drivers. I'm sure that this will help to prevent "landscaping" Good luck. Pifonski

Hi, The error means the storage device that you are storing jobs is full or out of space. 68.2 may mean a DIMM slot? Are you using a memory DIMM in addition to was is standard with your CLJ3000? If so, it may be full or out of memory or possible incompatible. If you are using a external hard disk, you may be out of space and may require you delete some files. And I share a link please visit and read instruction guide. I hope solved your issues. http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?spf_p.tpst=kbDocDisplay&spf_p.prp_kbDocDisplay=wsrp-navigationalState%3DdocId%253Demr_na-bpl12422-6%257CdocLocale%253D%257CcalledBy%253D&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken#N10D64 Thanks, HP Printer Support

Umm, yeah..... you have to be a little more specific.

Hi,
As you mentioned that the printer makes loud grinding noise or squeaking when page comes out than i feel this is the noise coming out due to faulty fuser.
I want to be sure so please open the rear bin and try to print if still noise comes than i m sure it is fuser.
If there are smudges on the printed page or if some film coating is coming out with printed page than fuser roller are physically damage.
However in this case i assume fuser is faulty.
If there opening the rear bin noise goes off than top output rollers are faulty.

Thanks and Regards
Neeraj Sharma

problem in board which provide high voltage replace dc controller regard fadel

Is the paper feeding from the manual tray or tray 2. If you are printing from tray 2 and have this problem then it is likely that your driver or software is looking for different paper types than you have loaded in the printer. For example, if you have plain paper in tray 2 and your software wants to print on letterhead, then the printer will stop after each page and by pressing the button you are telling the printer that it is ok to print on different paper. If you have the paper in the manual feed tray (tray 1) then I would check to make sure you are telling the pirnter to print to tray 1 and not manual feed when you send a print job.

Find out defective printer logic board which is having usb port, carefully remove & fix it to 2055 formatter board. If you are technical guy go to TV repair shop & get it done..

just replace the cartridge...

check the paper jamed or not other wise try to reset your printer