20 Most Recent Evenflo Jenny Lind Crib - Page 4 Questions & Answers


Call Evenflo at 1-800-356-2229

Evenflo Jenny... | Answered on Feb 26, 2011


You may have to call Evenflo and have your model number ready. If they dont have it
you are out of luck. Evenflo 1-800-356-2229

Evenflo Jenny... | Answered on Feb 24, 2011


Many Evenflo cribs are on recall. That's actually good for you.
Call Evenflo at 1-800-356-2229. Give them your model # off the sticker.
If they say it isnt on recall, ask for a set of instructions. Most companies will
mail them to you for free.
If it is on recall, have them send you the free parts AND a set of instructions.
I like it..... WIN WIN!

Evenflo Jenny... | Answered on Feb 24, 2011


You will not find instructions for this crib. The company is out of business. It is pretty straight
forward design wise. Either a nub holds the top of the fixed side and a bolt holds the two bottom ends
or all 4 have bolts. The spring/mattress support goes in next and the dropside uses two steel rods
the are about 2 feet long and they go vertical down each headboard down to the L braces at bottom. They feed through the dropside and a sprin goes under the dropside wood to keep it from slamming down
on the L brace. 2 screws hold the rods in place. If you have a specific problem post it and I will try and help you through.

Evenflo Jenny... | Answered on Feb 24, 2011


how to put a baby bed together

Evenflo Jenny... | Answered on Feb 13, 2011


If you have the model number usually on the bottom of the crib, if it is one of the Jenny Lind make you will need to know the date it was made that is on the same spot. You may find it in Jenny Lind, but it depends if the crib is still replaceable or not. It all depends on their product replacement parts policy.

Keep in mind that "Jenny Lind" is actually a style name used by several different manufacturers. Although we can service most of the U.S. made cribs and cradles, it is very helpful to know who originally made the crib or cradle. "Jenny Lind" is not a manufacturer.

Check in this links:
- safety.evenflo.com/cs/sc/cssc99_RD (for contact)
- evenflo.com/replacement_parts (search right model and manufactured date).

Hope this helps.

Evenflo Jenny... | Answered on Feb 03, 2011


Evenflo Jenny Lind Crib has been recalled.

When you call to get the kit to fix the problem (800) 356-2229 you could ask Evenflo directly!

Here are instructions without a manual...

1. Lay the headboard on the floor in front of you with the bracket holes and model number facing you. Use 2 ¾-inch wood screws to attach the L-bracket and the latch bracket to headboard. The L-bracket has 3 holes and attaches to the holes on the lowest section of the headboard. The latch bracket only has 2 holes and goes directly beneath the metal bracket for the mattress that is already attached. It should face toward the center of the headboard. Once you're done, complete the same procedure on the right side of the headboard. Then do the same for the footboard.

2. Stand the headboard up so you can attach the rails to it. First, place the cross dowel (the small piece of wood with a hole in the side of it) into the hole on the underside of the top rung of the rail. Then put a second dowel in the top side of the bottom rung. Line the left rail up with the headboard at a 90-degree angle, placing it in the brackets you just installed, and insert a 2 13/16-inch machine screw into each of the 2 holes on the front side of the headboard (the side that will face outward). Tighten each screw with your screwdriver until it hits the cross dowel. Then turn the cross dowel clockwise to lock it in. Do the same for the right side and then for the footboard.

3. Slide the mattress platform (the bottom of the crib) into the stabilizer rails (easy to distinguish, since they are the same size as the sides of the platform), putting the longer ones on the sides and the shorter ones on the ends. It will slide in easily. Use 5 ¾-inch screws to attach the hanger brackets to the corners of the platform. The holes are predrilled and you can only put the bracket on one way to match them up, so there is little worry that you will attach it wrong.

4. Put the support brackets (the straight, flat ones) on top of the predrilled holes in the underside of the stabilizer rails. Screw them in with ¾-inch wood screws. Then place the hanger brackets in the slots that were preinstalled on the headboard and footboard. Choose the level that will suit you best. Evenflo recommends the top two for infants.

5. Snap a caster (the round disc) on the bottom of each foot of the crib. Check that all your screws are tight to keep your baby safe.

Evenflo Jenny... | Answered on Jan 29, 2011


try a mechanical supply store

Evenflo Jenny... | Answered on Jan 22, 2011


Just need add the "serial number" in THIS SITE to know details or parts replacement.

Hope helps.

Evenflo Jenny... | Answered on Jan 21, 2011


That is a recalled Crib. The drop sides may give out and cause a baby rolling over to become entrapped in the partially let down drop side.

Evenflo Jenny... | Answered on Dec 30, 2010


Hi, I found the Evenflo 9021 manual here for download, this should list where you can get replacement parts

Evenflo Jenny... | Answered on Dec 17, 2010


I need instructions to asseble jenny lind crib #012614

Evenflo Jenny... | Answered on Dec 17, 2010


Need complete discription of missing parts. I may have them.
babycribdoctor.com

Evenflo Jenny... | Answered on Dec 01, 2010


model # 0161615 i need setup instructions

Evenflo Jenny... | Answered on Nov 21, 2010


Hi.

Please copy and paste the link below in your browser bar to download the manual. Choose save as when asked.

https://plweb.evenflo.com/ShowDocument.aspx?ManualID=498



See also this tip: How to Assemble ... eHow.co


See also: Evenflo

Regards.

Ginko.

Evenflo Jenny... | Answered on Nov 09, 2010


hi
try this how to

http://www.ehow.com/how_4761504_assemble-jenny-lind-crib.html

Evenflo Jenny... | Answered on Oct 19, 2010


hi
here is a list of recalls
http://safety.evenflo.com/cs/sc/cssc99_RD.phtml?rid=EFR29&src=WEB

Evenflo Jenny... | Answered on Oct 19, 2010

Not finding what you are looking for?
Evenflo Jenny Lind Crib Logo

342 questions posted

Ask a Question

Usually answered in minutes!

Top Evenflo Baby Gear Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Rob Sinbad
Rob Sinbad

Level 3 Expert

709 Answers

Stitch85

Level 2 Expert

32 Answers

Are you an Evenflo Baby Gear Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Evenflo Baby Gear

  • Evenflo Baby Gear

Most Popular Question

ibought jenny lind crib in 1980 safe

  • Baby Gear
Loading...