20 Most Recent Maxi-Cosi CabrioFix (Black Reflection) Infant Car Seat - Page 9 Questions & Answers

The sun shade is already on the car seat! It comes with it! When I recieved my car seat I thought it was missing this part. It is actually pushed in behind the plastic ridge at back of car seat!! I found it kind of hard to pull out but it is def there!!!

Hi, Yes the **** strap will fit through the hole, although this is a tight squeeze, but often something that people mention as a little tricky. I hope this helps.

Hi,

Yes you can, this is called a Quick Adjuster I think and costs very little.
Contact www.maxi-cosi.com who will advise you.

I hope this helps.

Hi,

If you purchased the carseat without the bars, then this is a Cabrio and not a CabrioFix carseat, and nothing can be done to adapt this to become a CabrioFix.

I hope this helps.

Hi,

If you contact www.maxi-cosi.com you will be able to purchase the parts from the supplier.

I hope this helps.

Hi,

If you mean the Cabrio Car Seat, then yes this is compatible with the Quinny Zapp.

I hope this helps.

Hi,

Although you can buy generic head huggers that will fit fine, you could contact www.maxi-cosi.com who will be able to help you to buy the branded version.

I hope this helps.

Hi,

If you contact www.maxi-cosi.com they should be able to advise althought I fear that you will have to buy a replacement car seat shell as I am not confident that just the handle can be replaced.

I hope this helps.

Only the manufacturer!

hi chezfeaseys..here's a link for a manual..hope it helps..good luck!!!


http://www.instructions.maxi-cosi.com/download/cabriofix.pdf

Ask here, they can get you most Maxi Cosi manuals.

The Maxi Cosi CabrioFix and EasyFix can only be used with IsoFix or the seat belt on (preferrably) the back seat. Please don't alter the mounting system of the seat as it will give unpredicable results!

The Commodore name has been around since 1978 so it is possible when you own an older Commodore you won't have any means to fix the Maxi Cosi seat.

If you do have IsoFix and/or seat belts in the back seat then please elaborate on the exact nature of the problem.

With kind regards,
Babycare.nl
Erwin de Raad

hello boss why dont u contact the same place where u have bought the carseat earlier(4 months back).. i guess he can be very help ful to u..

hi maria10102..hope this helps..good luck!!!
The sun canopy is located in the rim of the shell.
• Place the carrying handle in the carrying position.
• Open the rim by pushing the button at the back under the rim and releasing it.
• The sun canopy is now visible in the opening
• Pull it out and place the ends of the sun canopy with the buttonholes over the hooks on the carrying
handle
• When storing the sun canopy, make sure you place it in the rim carefully and close the rim properly

http://www.instructions.maxi-cosi.com/download/cabriofix.pdf

hi bodsierpa..hope this helps..good luck!!!
• First remove the belt pads.
• Open the rim at the sun canopy as far as possible
• Remove the cover from the hooks
• Remove the cover then from under the hooks and quick adjuster button
• Pull the buckle tongue sections and adjustment strap through the openings.

Contact Maxi-Cosi on 01842767965 as they sell a replacement fabric set for £40 plus postage which includes the head hugger etc. Not sure about the foam but they will tell you if they do it.

This is also available from some Maxi-Cosi retailers to order and may save the postage. Google maxi cosi replacement fabric and you should get some options. Hope this helps!

hi if the car seat you have is the cabriofix it already has sun shade, if you look on the back there is a button under the rim at the top ( on mine the button is silver ) hope this is helpful

What seems to be a sewn-up loop, is actually easy to unattach, but the trick is not explained in the manual.

Where the end of the strap seems to be holding to the seat's plastic shell, the plastic is not completely connected, there is a break in the plastic. Just move the strap left/right a bit and you will see that you can unattach it there. Then you can unthread the loose end of the strap and completely remove the cover. 

Credits for this go to my wife who figured it out after I already thought we should return the seat to the shop. :p

I don't have a link for the manual, but I am a Dad. Most the time they use the lap belt to run acrossed the center of the car seat. If your child is an infant, then they should be facing backward. Sometimes the car seat will come with a base that the infant seat locks into. You use the seat belt on the base for this kind and then lacth the infant seat into it.

Most of the time, police and fire stations will offer assistance with installing car seats properly, in case I didn't help.

Good luck!

Never submerge the straps fully in water - it can damage the webbing so that they're not as strong and safe.
I don't have that seat, so I can't tell you how to remove them, but car seat harnesses should only ever be cleaned with a damp cloth.