20 Most Recent Maxi-Cosi CabrioFix (Black Reflection) Infant Car Seat - Page 2 Questions & Answers

HiWhen you press the silver / grey button at the front of the carseat you should pull both harness straps at the same time and it should loosen the harness. If this is not happening the carseat needs to be inspected. Please contact your retailer with proof of purchase if it is under 12 months old. Alternatively please let us know what country you're in and we can put you in touch with the correct customer care team to assist.

Hi,The handle is not any part of removing the CabrioFix from the Easybase 2 apart from to lift the carseat away from the base. You need to press the grey / silver buttons on either side of the carseat and hold them down as you lift the carseat from the base to remove it.If you're still unable to do so we would advise you to take the product to your retailer with proof of purchase for them to investigate further.

Hi,The sun canopy has a length of elastic at either end with a turn-over that is stitched in place. These lengths of elastic need to be pushed past a nub of plastic inside the sunshade rim around where the handle of the carseat is joined. Pull them past the nub of plastic and release, and the turn-over will prevent it popping past the nub. Tuck in the sunshade around the rim.

Hi,Open the carseat harness and have the carseat in front of you so you\'re looking at the seat. Slide the shoulder harness pads down the length of the harness and off over the harness clips. Unzip the footmuff and place it into the seat and thread the harness through the holes at shoulder and crotch position. Replace the shoulder harness pads onto the harness. You can now place your baby in, do up the harness + tension correctly, then zip up the footmuff to keep baby cosy.If you\'re still using the headhugger/lumbar support wedge this can be used underneath the footmuff.

Please contact Maxi Cosi USA by e-mailing to [email protected] and they will be able to assist.

It would depend on which base you have. Visit www.maxi-cosi.com and select your country, then select the base you have and you will see an option to download the instruction manual/view an instruction video on how to fit. Alternatively contact your retailer and ask for further instruction on how to fit it.

Just bought the Cabriofix. Went home and got upset when the straps wouldn't lengthen. As an excited father I tried to keep calm as I tried and tried and tried again. Good ols Google, put the car seat down and jumped on the net to find a solution. 2 minutes later and hey presto.......the grey button that you press HAS to be pressed FULLY IN. Not just press as it easily does, but with a lot of pressure it will sink in another 5mm or so then this releases the straps. So I'm again happy :-) and pleased with my purchase. Now just got to wait 4 more moths till baby is here. Can't wait !!! Oh and ladies, you might want to trim your thumb nail or you won't be able to press the button fully in, sorry :-( Hope this helps you all though, and good luck all.

Full instructions are in the user manual. If you no longer have your user manual you can download a copy from www.maxi-cosi.com

The Maxi Cosi CabrioFix can be fitted using the EasyFix base (IsoFix or seatbelt fitted) the EasyBase and EasyBase 2 (fitted with seatbelt only) or the FamilyFix base (IsoFix only). If you do not have IsoFix points you need either an EasyBase or EasyBase 2 to be fitted with seatbelt.

Please refer to your user manual for directions on how to correctly use the carseat or ask your retailer if you're unsure.

Refer to your user manual for instructions.

Maxi Cosi fabrics only have the Side Protection System tag if the seat they are designed to fit has the SPS technology (not all seats do). Make sure you have the correct fabric for your carseat.

We think you mean the bar is locked in position and cannot be moved to enable you to carry the seat and use it correctly? Please contact your retailer with proof of purchase if the seat is under 2 years old for them to send it to the engineers for inspection/repair work required.

Replacement harness pads can be ordered via your local Maxi Cosi retailer or direct with the customer service department on 01284 413 141 Mon-Fri 8.30-4.30. RRP is 10GBP for the set. It comes as a set of three, in plain black only, and if ordered direct there is 3.99GBP p+p.

The support leg on the base cannot be detatched. It is part of the safety feature on the base and should not be removed.

The harness of a carseat should never be removed due to the safety implications of it being incorrectly fitted. To replace the harness the carseat would need to be sent to the engineers. If you are a UK resident please contact 01284 413 141 Mon-Fri 8.30-4.30 to book it in. Standard charge is 72GBP.