HP Deskjet 2330 InkJet Photo Printer - Answered Questions & Fixed issues

great to hear!

Hello there
You may not see a paper jam.

This may work for you, it has worked for many here I given this advice so gave it a try it could work for you. Generally when this happens, something has fallen into the printer, or a piece of paper has been jammed in there.

First step, remove the ink cartridge, and turn the printer upside down and gently shake it, see if anything comes out.

If nothing goes, or you can't hear anything rattling around, get a piece of cardstock paper (60lb or heavier) and gently push this through the printer, to see if it will help push out what might be stuck in there.
And gave the rode that the ink slides on a good clean and maybe a bit oil on cloth and wipe the rod with it.

Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

press and hold the power button of your printer for 20-30 sec and make a copy if still the same issue occurs the proiblem is with the printer
try the step

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01296418&tmp_track_link=ot_recdoc/c00859572/en_us/c01296418/loc:2&lc=en&dlc=en&cc=us&lang=en&product=1827327

if nothing happens
contact HP and they will probably replace the printer for you
HP toll free number -1800-474-6836


hope your issue gets resolved

thanks
regards
hamid

go to start >> click on run>>type "cmd" without quotes in box

command prompt opens type>

net stop spooler

and hit enter

net start spooler

and hit enter

go to the printer icon >> Right click>> Cancel ALL documnts

select yes
disconnect the usb

reconnect it back

and print

go to the following link and select your OS:

http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=1827327&lc=en&cc=us&dlc=en&submit.y=5&submit.x=7&lang=en&cc=us

* please rate me :)

1)right click the my computer icon
2)click properties and then click hardware n go to device manager.
3)uninstall all usb ports and then scan for hardware changes
4)ur pc will detect your printer and ask for printer drivers
5)re load drivers and your pc will communicate with your printer
6)for reloding install the cd follow the instructions on the screen and click next
7)restart when the printer is loded.connect the wires and cords properly.
 

the gears of the printer r worn out and they have hanve lost their allignment settings so this problem.either replace the gears.or the other solution.do not insert the paper in the tray ,keep it little bit outside and hold the end of the paper in hand when you will give a printout the printer will make a noise of picking the paper at that time just push the paper inside and then it will print properly.

You need both cartridges to run your printer.

Question edited for a lot more clarity. It usually depends on the lights and the colours https://www.google.com/search?q=HP+Color+LaserJet+3600+Printer.+I+have+2+flashing+lights Page 155 and 156. http://h10032.www1.hp.com/ctg/Manual/c00390162.pdf ..

you need to do factory rsest of the printer

Hello. First of all I would like to wish everyone a Happy New Year! I recently bought a HP Deskjet Ink Advantage 3515 printer. The printer works fine (prints, scans and copies). There is only one problem with it. It returns me an error when I'm shutting it off. This happens very often but not always, it is kinda annoying. The error is displayed as: ERROR CODE 0X02B7C2ED SM_MODULE C (the error is also shown on the image). I tried to Google the problem but without effects. I don't know what could be the problem. Can someone help me please, because I have no idea what could be the issue. Thanks for any replays.

https://support.hp.com/us-en/printer-setup/hp-deskjet-2600-all-in-one-printer-series/12319824/model/15787937

Go to this website. http://support.hp.com/us-en/product/HP-DeskJet-Ink-Advantage-3830-All-in-One-Printer-series/7172328/model/7172329/drivers/ Click check now and it should download the best driver for you. If not use step 2 and find the driver you need.

check it`s sensor

Check the paper size settings to match the loaded paper. This would happen (for example) if you have loaded A4 paper but your driver is set to print on letter format. Letter is wider than A4 by 6mm and while the printer is trying to print near to the right side, assuming the paper is wider, part of the ink goes on the paper support. Other reason may be the paper size in the document is set to be larger than the loaded paper format and driver prints only what can be fit on the loaded paper.

1) Open the printer cover and wait till the carriage moves towards the middle. 2) Force press the printer's Power button to turn it off. Remove the power cord from the back of the printer. 3) Remove the print cartridges and place it on a small sheet with the nozzle plate facing upward. 4) Slightly wet a cotton swab with distilled water. Clean the face and edges of the face cartridges with the swab. 5) Wipe the underside of the print cartridge cradle walls using a swab. Reinsert the print cartridges. 6) Close the printer cover. Connect the power cord at the backside of the printer.

On the control panel, select scan to computer and choose PDF. If you are using the sheet feeder, it will scan all pages and create one file with them all. OR If you're using a scanner glass, i.e. one page at a time, when the first page finishes scanning, you will get a message asking if you have another - answer YES and follow the instructions (basically that means place next page on scanner glass and hit OK/Continue). Rinse and repeat until you've scanned all pages then answer NO. You should find a PDF file in your HP Scan Folder usually named "scan.pdf" unless you've changed the settings. (If there is/are already scanned files in that folder, they will have consecutive numbers, e.g. "scan001.pdf" "scan002.pdf" etc

www.hp.com/support enter printer model and number and run diagnostics with your printer connected to your PC or Laptop.

Possible cable problems. Also mine shows offline if the power button on the printer is off

I have had this happen in windows operating system. It was caused by a corrupt user profile. You can try control panel users accounts. Try modifying the user account type like changing the permissions and windows should re save the user profile . then change it back to what it was. or look at https://neosmart.net/wiki/corrupt-user-profile/