Kodak EasyShare V1003 Digital Camera - Page 2 - Answered Questions & Fixed issues

first - check physical connection:
when the camera is connected to the computer through usb, the camera should be turned on, nothing will appear on the screen and you will see a flashing light from the camera signifying that it's "making a connection"

if, the camera screen is active while connected to pc, that means it's not making connection so check other USB port, like the back -it's more reliable as it's directly connected to the motherboard, not a hub like that of the one in the front of the tower

when it's showing a flashing light, check if the computer shows an "image transfer window" - that will appear if you are using Kodak Easyshare Software, if you don't have it installed, check if WIA (Windows Imaging Acquisition) transfer options will automatically pop up

If not please check this
rightclick on My Computer> properties> Hardware> device manager

1. check if the cam is a subcategory of the Universal Serial Bus Controllers -

a. IF IT IS, highlight it, rightclick and select Update Driver, select bottom options until it asks you to choose between "Kodak Camera" and "Digital Still Camera", select "Digital Still Camera"
now it will update then check if it would appear under "Imaging Devices" (if you have XP) or "Portable Devices" (if you have Vista)
a transfer window should appear using WIA, then follow prompts
a.1 if it created it's own category under Device Manager, open my computer, select your camera and it will act like a removable disk, so you can copy and paste pics


b. IF IT IS NOT, please check if it's under a Kodak Category (open my computer, select your camera and it will act like a removable disk, so you can copy and paste pics) or Imaging Devices/Portable Devices, righclick on your cam model or kodak camera> update driver, select bottom options and at the part where it asks you to choose bet the kodak cam and digital still, please select the Kodak Cam, then an Eeasyshare Software Transfer Window should appear (that's if you have Easyshare Software)

you can dl it from www.kodak.com/go/easysharesw

You don't need any software.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or, despite what I said first, you can use any photo cataloging program such as Picasa.You may view/download the user guide here.

Try NOT connecting your camera to your computer.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program such as Picasa.

The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries. Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program such as Picasa.

First of all, recover lost files from memory card1. Do not save any new file to memory card.2. Connect memory card to computer. You should see memory card shown as a drive letter (like H:) in My Computer.3. Download best photo recovery software from here this asoftech photo recovery program help me before, works quite well and it's easy to use4. Install and open asoftech photo recovery program, select your memory drive, and click 'Start' button to start scanning process which will find your photos.After you get back your photos, you can format the memory card to fix the problem.

in menu, you will sele sound memo, and adjust the volume.when your record your must press func/set button, you will get sound.read your owner manual very well.God bless you

A new screen is availably from virtualvillage dot com for about $45. I replaced one last week. It only takes 20 minutes and a small screwdriver. The ribbon cable is held in by a flip up lock at the main board.

Your camera has a built-in memory for storing a small amount of pictures when you don't have a memory card in the camera. Yours is full. You can go into the menu and find "copy" which will allow you to copy the internal memory to a memory card for easy downloading to your computer. After you do this, you should remove your card, go into the menu and find "format"..follow the on-screen instructions to erase the internal memory and promise that you will never use it again. It's way too much trouble!

The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program such as PIcasa.

hi

try a fresh download of the drivers from here
KODAK EASYSHARE V1003 Zoom Digital Camera Downloads and Upgrades

riz.

Hi there,Here is a digital copy of the user manual for v1003 and v803.http://resources.kodak.com/support/pdf/en/manuals/urg00665/V803_V1003_GLB_en.pdfTo download the manual to your computer, right click on the above underlined text and select Save File As, select the location you want to save it to and hit save.if you are unable to open the document you need to get a reader program, one such free program is foxit reader available at http://www.foxitsoftware.com/downloads/Its the first one on the page, under product downloads, Says Windows 32/64-bit and download right below it.If you need further help let me know. I will respond as soon as I can.Thanks,Ekse

Sounds like a lens error. Look for sand particles around the gaps of the lens barrel (a single particle can jam it). Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended ... Here are some troubleshooting steps that you can try that may (or may not) correct it. They only seem to work for less than 40% of the lens errors, but if the camera is out of warranty (or repair cost approaches that of the camera), they're worth that try. Some of the later steps do involve some risk to the camera, so carefully weigh your options before deciding to conduct them:

If you're looking for a replacement part, you can order one from
http://uscamera.com/3f9713.htm
or
http://uscamera.com/3f9713usc.htm

How long have you owned the camera and how long have you had this problem? It is either a battery issue or the something in the zoom mechanisms is defective and causing it to shut off. If you feel inclined you may want to try a new battery if you've had the camera for a while. If the problem persists you will need to look at repair/replacement.
Thank you,
Lee

There are several possible causes for "memory card locked/protected", "memory card error", or "no memory card". The most common is trying to use a 4GB or higher SDHC card with an older camera made before SDHC format came out. Other causes include problems with the tiny slide switch on the side of the card (which you said you've tried), or the electrical contact switch internal to the camera. The problem may also arise from simple formatting problems if the card has never been formatted in the camera (note that this will also erase the card). Troubleshooting tips for this problem may be found at this link.

its a software problem press the reset button or get it 2 service centre

Try NOT connecting your camera to your computer.

The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.

Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use iPhoto or any other photo cataloging program.

Fixing a Lens Error on a Digital Camera

This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include "E18 lens error", or "lens error, restart camera". Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.

The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous interiors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many cameras, and NEVER use a case for this very reason.

A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.

Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.

The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:

Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.

Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.

Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particles that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.

Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.

Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in "no heat" setting, or sucking the gaps with a vacuum (careful with this one).

Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.

Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.

Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.

Plug the memory card into a card reader (either built-in to the computer or connected via USB or FireWire). Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program.

The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.

Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program, such as Picasa ( http://picasa.google.com ).