20 Most Recent Navman NavPix N40i GPS Receiver - Page 4 Questions & Answers

you have a small button on the side of your navman, an ON/OFF button! put it in the OFF state, leave it for a few minutes and then put it back ON and it should solve yourr problem

I have a spare window mounting bracket as new , but I need SmartST 2006 SE CD Rom. If you want to do a swap , that is you send me a copy of SmartST 2006 SE and I send you bracket email me at
[email protected]

Push goto button together with - (sound) for a few seconds

Solution to get GPS Navman N40I working with Windows Vista.

I solver the problem (most of it) by uninstalling the old activsynk witch was delivered with the manufactory CD. Then I downloaded from “http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center.mspx” Windows Mobile Device Center. After installing this software I connected my Navman N40I to my PC and waited to for the Mobile Device Center application to load. When it tried to gain partnership with my GPS I removed it. Voila, and the SmartST Desktop 2006 SE application was able to communicate with my GPS.

Hope this will help you!

Kind regards
Mega A

I have the same problem so I contacted Navman on 1300 628626 and without any hassles they said they'd post me a copy so if I were you I'd give it a try. God only knows I tried other ways to no avail.

I have the same problem so I contacted Navman on 1300 628626 and without any hassles they said they'd post me a copy so if I were you I'd give it a try. God only knows I tried other ways to no avail.

you should be able to download it online for free,

navman site has updaters

Is it the power cut-off or the fact that you are not moving?
The Auto-off feature will turn off the unit when no movement is detected. Meaning, when you come to a stop and do not move for a minute, two minutes, or what every amount of time you’ve set, the until will turn itself of saving you power. You can also set this for the DC power cord. Mine is set for 5 minutes.

Unplug Navman USB before reinstalling Navman software.

As pdf from navman site? Most seem to be there

I installed the SmartST software and went to Setup -> Update Software -> Update Software on Navman.

It started working again after I had turned it off for an hour. mmm Grahame

I have a S30 Navman I was using it , when I got to my destination I turned it off when I went to turn it on to go back it will not turn on no picture or anything

can you help me please thank you

Does the car charger cord plug into the cradle? or just straight into the unit (despite resting on the cradle) ? Do you know if anything else charges via the car charger?

Hi,

Are you not able to run the activesync program despite the Vista warning? Did you try running it in compatibility mode? What happnes when you try to connect with sync center (what happens...any error messages)? Regarding the mobile device centre...did you check that McAffe and windows firewall is not blocking it from internet access?

Go to the Navman web site and you will find your answer.

Not for that model. You can for others, you buy the UK map. I recommend the Garmin Drive 50 for the UK. I bought one for a friend in the UK and bought one for me here in Canada. https://www.navman.com.au/ezy15#Features https://www.navman.com.au/international-maps https://www.google.com/search?q=Australian+Navman+EZY15+UK+map ..

hello peter To restore the device to factory default settings, go to Settings > Device > Restore factory defaults. Please note that you will lose all stored information on the unit including addresses (ex. MY Places, Recent Locations). you can aslo contact the customer care

This is an Australian unit. We are in North America. This link might work better for you. https://www.google.com/search?q=navman+Tracker+5500+not+locking+on+to+satellites ..