20 Most Recent Casio Exilim EXZ1050 Digital Camera - Page 8 Questions & Answers

if its a hd card it will have slid to lock position on card simples

Change you battery?

the power switch of the camera would be damaged. you have to get it repaired

Katie, Joe alerted me to your problem. The symptoms that you're experiencing suggest that you're experiencing a lens error. Lens errors are fairly common, but there are many causes. Some causes include poor or drained batteries. Or sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended ...Here are some troubleshooting steps that you can try that may (or may not) correct it. They only seem to work for less than 40% of the lens errors, but if the camera is out of warranty (or repair cost approaches that of the camera), they're worth that try. Some of the later steps do involve some risk to the camera, so carefully weigh your options before deciding to conduct them:

If it is brand new and any fault is excluded..than the batteries are the only one to blame ...Check again to be sure you inserted them well and in the right position ..and also if you do not use rechargeable ..use only high quality ones..cause some batteries on the market do not have the correct amperage and will not power the camera ..Also pay attention cause some cameras have a double power source ..and can be powered from an adapter...so ..they have a button to switch mode...This can be the case for you too ..

When you get the whitescreen, are you able to bring up the menus and stuff on the LCD screen? Please provide this info so that I can tell you what the problem is.

Sai.

Having gone over a month without a reply to my query, I assume my suggestion to use a card reader solved the problem.

The EX-Z77 is not a battery charger. It does not charge via the USB port. You need to remove the battery from the camera and put it into the supplied battery charger.

If you need a manual, you can download one at
http://support.casio.com/pdf/001/EXZ77_e.pdf
The battery charging instructions begin on page 36.

Compre una Bateria en http://www.ebay.com/itm/VUPOINT-Battery-DV-DA1-VP-DV-DM1-VP-DC-MDV330-VP-NEW-/260563536022

You can download the manual from the manufacturer's web site at
http://support.casio.com/pdf/001/EXFH20_e.pdf

Please check on the link below for tips to remove and replace the screen. In the first place youneed to confirm the failure and buy the part before the camera is opened.

click on : http://www.youtube.com/watch?v=aB4x7F5Chow

something wrong with your camera lcd screen display. you can replace it by yourself.
www.skiliwah.cn/
http://www.digitalcamera-parts.net/
e-mail:[email protected]

The Exilim is using SD-cards to store the photos. These are usually unlocked by pushing them in a little. Try using your thumbnail to push it, then remove the pressure. It will spring back and come out a little. Then grab it and pull it out completely.
Also, you can connect the camera directly to the computer via USB, which may be more comfortable for you, if you just want to transfer the photos.

You can download the manual from the manufacturer's web site at
http://support.casio.com/manualfile.php?rgn=1&cid=001007047

If the card has a slide switch on the side, move it to the unlocked position.

Hello Edwin,

i found this info on the casio site:
here you can get your casio product repaired:
City: QUEZON
Service point: COMPEX INTERNATIONAL INC.
Tel.: +63-2-7110288
Fax: +63-2-7110627
email: [email protected]

hope it was helpfull.
Good luck
igor

I think it is a physical cause...and in most of the cases it is either the motor blame or something got between the lens and the main body ..If you still hear the motor trying to close it ..(sounds like a buzz) it may be functional but just stuck ..First try to take it out at the max ..by gently forcing it ..while you set it at the max zoom from the controls..Also wipe clean with a soft cloth the exposed parts of the lens that came in contact with the body ...to remove any traces of sand .Point the camera downwards when you are doing the expending of the lens..The idea is not to have any resistance (use the gravitational forces )..and first you have to expend them fully in order to get rid of any foreign corps may have stuck in ..After that repeat the operation while pointing upwards...in a try to close it ..
be sure you do not force them in or out ..but just give it a little push to see if they will work after ..If non of these works ..it means there is something more than just some sand ..and will have to be opened and cleaned..; see whats the issue and put it back ..I suggest professional help for that ..if will be the case..
have a nice day !