20 Most Recent Lexmark X5470 All-In-One InkJet Printer - Page 3 Questions & Answers

Hi,
I can understand that u get TWAIN driver not installed or required error on PC while scanning.
Twain drivers are imaging driver which are bundled with complete software.
Incase if you try to replace just the twain driver it may corrupt anoth files.
It is always advisable to clean the computer and reinstall the complete software.

I have a fix-all solution for you ink-jet printer people(only if it not a plotter). If it doesnt work after replacing an ink-cartrdge or print-head, through it away (recycle it) and by a LASER PRINTER. FIXED

There are few things you may try to fix the above problem.
Rebrick the printer. and set the printer to factory defaults

http://top.windows9download.net/list/lexmark-4425-004-printer-driver-ocr.html there you go hope that helps

A Right Cartridge Incorrect message generally indicates a communication error between the All-In-One and the cartridge. This can be caused by a faulty cartridge; however, it may be due to a simple interruption in the communication between the cartridge and the All-In-One.
The procedures below will help you to identify the cause of the error and resolve the issue.
Rebricking the All-In-One and Resetting the NVRAM
NOTE: The embedded links in the table lead to specific troubleshooting documents.

Step Action 1 Power off the All-In-One and remove the power brick from the back of the unit. Wait 20 seconds. Then reinsert the brick and power the unit back on.
Did the error message return?
Yes: Continue to step 2.
No: Print a test page. If the test page prints, the error is resolved.
2 Reset the NVRAM of the All-In-One
Did the error message return?
Yes: Continue to Checking the Cartridges.
No: Print a test page. If the test page prints, the error is resolved.


Checking the Cartridges
NOTE: The embedded links in the table lead to specific troubleshooting documents.

Step Action 1 Open the top cover of the All-In-One. Remove both cartridges. Close the top cover. 2 Power off the All-In-One and remove the power supply brick from the back of the unit. 3 Reinsert the power supply brick into the back of the All-In-One and power the unit back on.
Does the error message reappear?
Yes: Skip to Contacting Lexmark. There is a hardware issue with your printer and you need to contact our technical support center.
No: Continue to step 4.
4 Clean the cartridge contacts (click here for instructions) and the AIO carrier contacts (click here for instructions). Continue to step 5.
5 Power the AIO on, reinsert the black/photo cartridge, and close the top cover. Power the All-In-One off and then back on.
Does the error message reappear?
Yes: Power the unit off and try step 5 with another black/photo cartridge. If the error persists with the new cartridge, proceed to Contacting Lexmark.
No: Continue to step 6.
6 Power the AIO on, reinsert the color cartridge, and close the top cover. Power the All-In-One off and then back on.

Does the error message reappear?
Yes: Power the unit off and try step 6 with another color cartridge. If the error persists with the new cartridge, proceed to Contacting Lexmark.
No: Try printing a test page. If the test page prints, the error is resolved

First, unplug the Lexmark printer from your computer. Then uninstall any existing Lexmark X5470 driver from your computer. Go to Start menu -> Programs -> Lexmark X5400 Series -> Tools -> Uninstall. Uninstall the driver. Reboot pc when prompted.
When your computer turns on, check if your Windows 7 is running on 32-bit or 64-bit service type. Go to Start menu -> right-click on Computer -> Properties. Take note of the Service Type.
Visit the Lexmark website to download the Vista driver. Use the links below:

• Lexmark X5470 Driver for Windows Vista/7 32-bit
• Lexmark X5470 Driver for Windows Vista/7 64-bit

Download, execute the file and follow the instructions on the software.
I hope this information has been helpful. Thanks.

hmmm..with faxes in memory, that message means emptying out the memory, not the print cartridges..poor use of the word on Lexmarks' part.

do you have their print manager installed? if not, you can most likely find it through this link

Changing the Display Language
To change the display language, please execute the following steps:
Step Action 1 From the control panel, press Copy Mode. 2 Press . 3 Press or repeatedly until Tools appears. Then press the button.
4 Press or repeatedly until Device Setup appears. Then press . 5 Press or repeatedly until Language appears. Then press the button. 6 Press or repeatedly until the language required appears on the display. 7 Press to save the change.

Have you replaced the ink? Perhaps one color is low or one of the pin-heads is broken. If the pins on the printer have broken you will need a repair technician or just buy a new printer.

Fiend your solution direct from Lexmark. Here is your solution



http://www.lexmark.com/printer/prob676ijt65/solution
930

This is common problem with lexmark cartridges they detect refilled cartridge you need to clean the copper contacts of the cartridge and then insert it if it still shows " color cartridge replacement required" message then you need to buy original color cartridge.........

You'll need to reset the factory defaults.
Download the User Guide (PDF) from here:
http://www.lexmark.com/publications/pdfs/2007/4800/en.html
(I'm assuming you have the something in the 4800 series of printers, though you posted your question in the 5400 series section)

Go to page 56&57 and follow the directions there.

If you have the 5400 series, the link is here:
http://www.lexmark.com/publications/pdfs/2007/5400/en.html
See page 123.