LG 60PC1D 60 in. Plasma Television - Answered Questions & Fixed issues

The screen is damaged, the only way to fix it is to replace the LCD panel.

Fault to the main power supply regulator section. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. http://electro-medical.blogspot.com/ http://electronicshelponline.blogspot.com/ It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.

YOUR TV PLASMA IS OLD OR THE CHIPBOARD IS NOT POWERING UP..CONTACT THE ELECTRIC REPAIRER

You should have its factory remote control to do a reset to it. There is no other way to get into its service mode, and to make a reset. Contact the authorized service center for LG. http://electronicshelponline.blogspot.com/

Fault with its main board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/ . In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.

If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/

Fault with the main power supply regulator board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/ It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time.

you replace Y-sus board and maybe Z-sus also if the fuse is blown

Contact the authorized service center. A firmware update might be necessary. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/

LG Plasma TV Owner Manual ManualsOnline com Try this link to download the manual. http://electronicshelponline.blogspot.com/

online

How do you remove the back panel of a singer futura xl400 ?

Bad caps in power supply,Crack or splits on top of cap or leaking, Check value of caps in power supply.

Contact the authorized service center for LG. It will be best. Gopakumar Gopalan Google

hi sound like a power supply fault, could be capacitors or dry joints i'd look for a tech in your area hope it helps regard shaun

lack of education lost my account help me?(15,588,303)

Capacitor on the power supply popped and it is not allowing the proper voltage to be reached to the main board. This is messing up your picture. I would repair it before you create more damage from the blown capacitor on the power supply.


Please rate if this helped :)

It sounds that the video processor board to this set is faulty. It will be best to contact any service technician or authorized service centre for LG. If you wish to get some details, check this link. http://electronicshelponline.blogspot.com/ Selecting the view option, either to Mosaic / Time slide, can be selected by the drop-down list, at the top left of the display window, will make surf easy. You can also do a search, by type in the brand name/model number/IC used, in the search box at the top right of the display window.

It sounds like a loose contact to any one of COF. If you wish to get more details, check this link. http://electronicshelponline.blogspot.com/ Selecting the view option, either to Mosaic / Time slide, can be selected by the drop-down list, at the top left of the display window, will make surf easy. You can also do a search, by type in the brand name/model number/IC used, in the search box at the top right of the display window.Illustrations to defective screen-shots to plasma TVs, and details about it have been given.