20 Most Recent Lanier Copier Toner For 5627 - Page 5 Questions & Answers

defective toner... take it back to your vendor

Fuser error code Push clear modes 1 0 7 then hold stop for 5 seconds

User tools system settings- interface settings-(or the tab next to it) auto specify sender to on, you also have to add an administrator e-mail address for the administrator

Check IP address sub net, ect?

What kind? most one screw in front cover pull handle tward you remove finisher

Under user tools, system settings make all prints, copies to come out in internal tray, the front and rear covers have to come off to remove screw 1 each side the SC code is shift tray motor error

THIS IS FUSER UNIT

Did you try postscript driver from the Lanier website?

This is just a shot in the dark, but if there is no "reset" button, you might try unplugging it for a couple of minutes and it should reset itself. Just a guess. If you have an owners manual, I would check there to find how to solve this problem, but this may indicate the print heads are damaged in that area. You might enter the "menu" if there is one, and run any maintenance tools available to see if that corrects the problem. If you don't have an owner's manual, you might be able to find one at the printer manufacturer's website in the support section. This would give you a better idea if the problem was a do-it-yourself fix or whether you will need technical help.