20 Most Recent Lanier Compatible Copier Toner Black For 6112 - Page 9 Questions & Answers

its a moisture issue in the paper. try nice new dry paper and i bet it works fine

Try cleaning the polygon motor found in the laser unit, maybe you need the service manual. The motor must not rotate for lack of cleanliness. Good luck ...

Eenter in the service mode press yellow key - 107 - red key(stop) keep press for 5 seconds,enter in the SP mode open the front door,turn OFF the main switch,wait 15 seconds close the front door,turn ON the power switch.

Just change the drum unit, a new pcu will automatically reset the copier.

Hi Dwayne:This error occurs when performing the white level detection. Check: a - The white board on whether or not this position b - Glass and Optical c - UBS Card - (card may be faulty) d - BICU Card (may be faulty) e - Check the optics and connectors to the cards. I have heard that several times after cleaning the mirrors of the scanner worked.Hope this helps; also keep in mind that your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment about this answer.Thank you for using Fixya, and have a nice day.