20 Most Recent Lanier Ld445c Ld435c Ld430c Ld425c Ld420c Newdrum Kit - Page 5 Questions & Answers

Metal tab on right side of copier is bent and correctly touching the duplex unit interlock switch. Open the duplexer and notice the metal tab stick out. Put back to a 90 degree angle.

That is the master clamper area. Take off the rear cover. From the rear it is on the right. There is a motor and a rack gear that moves to open the drum master clamper when removing and loading a master. With the back cover removed, try to make a master while watching that assembly. You can also put the drum in and drive the motor by hand to watch and see if opens the drum clamper.

Its the brown belt thing on the right door, take off the 2 springs and remove the belt assy and empty, very messy...-Carl

The LD-620 appears to be a Ricoh Aficio MP-C2051 or C2551. You should be able to find a parts list on the net. Whichever one looks the same as your lanier (who don't make anything) will be the one. Good luck

Heat roller error

Laser sync error, bad mirror motor?

Hello sir; I believed you talking about LD045, am I right? In this model it doesn't have waste toner bottle, the only place you can clean is imaging transfer unit, after you cleanup the message will be disappear.

Hot section problem, call the service guy

defective toner... take it back to your vendor

Fuser error code Push clear modes 1 0 7 then hold stop for 5 seconds

User tools system settings- interface settings-(or the tab next to it) auto specify sender to on, you also have to add an administrator e-mail address for the administrator