20 Most Recent Jensen (DSCIR100A) Remote Control - Page 9 Questions & Answers

I would try scanning for channels when tv is hooked up to your house main aerial or a portable aerial. If it does pick up channels, the tv is not at fault but instead your aerial ontop of trailer. If this is the case, check your aerial plug. If the plug is moulded on it may be broken inside, or if it is a fixable plug, check that the outer coax shielding is not touching the centre core inside the plug.

You need to hold down the display button on the remote for 5 seconds or more. This should solve your problem. Let me know if you need anymore help.

hardrocko

Thanks for using FixYa and for the generous rating.

You do not help people with problems all you want is money. The schematic diagram use to be posted inside the machine and now all you want is money. I asked for a solution and you only see money. Do not send anymore of your stupid 'solutions'. All I wanted was an interactions with other users who may also gain from me.

If you are talking about the code so you can watch movies while you are driving there is no need. The pink wire that comes out of the back of the stereo that say brake needs to be grounded to a regular ground.

When You installed it the pink wire that said to brake did you put it to an actual ground instead of the barking brake?

U have a mechanism problem inside. Theres a problem with the gears or its out of alignment or the belt has worn out which ejects and inserts. Seek your nearest tech center.

Hello and welcome to FixYa.

Send me the brand and model of the remote, and the brand and model of the device you want to use it with.

Please provide the answers to my questions to me by adding a comment to this page, I will respond as soon as I get the message and when I'm available to respond to you.

Thanks,
Ekse

dgumkyhfkhjgjgjkfgkymu

I don't have a solution but do have the same problem.
I took it in a reputable shop and they told me the main board was gone and they could not get parts for it.
I just found out that Jensen is a Audiovox trademark.

http://www.tv-forums.com/forum/TV_Equipment_C4/TV_Repair_Forum_F3/Jensen_TS2050J_Parental_Lock_Code_P26336/

Found a forum with someone who had this issue. Hope this helps

For a manual code search, turn on the component and press and hold the component key (TV). The illuminated on-off key will turn on and stay on. While holding the component key down, press and hold the on-off key. The illuminated on-off key will turn off. After holding down both keys for 3 seconds, the on-off key will turn back on. Release both keys. Press and release the on-off key repeatedly until your component turns off. Wait 4 seconds between each key press. The on-off key will blink each time you press it as it tries another code. When your component turns off, you have found the correct code. Once that happens, press and release the stop key to save it. The on-off key will turn off. You MUST press the stop key to save the code or you will have to repeat the process. To make sure that the component is programmed with the correct code, try all of the components functions with the remote.

Hope this helps. =)

Hi

FixYa does not sell or provide remote control units. Your options are either to approach a Jensen agent in your area for a direct replacement compatible with your model number or alternatively purchase a Universal remote which can then be programmed to work with your TV.

If you would like to provide the exact model of your TV - I will be happy to recommend a suitable unit.

Many Thanks for using FixYa.

Can not find manual but here is a way to program it.

1.Manually turn on the component you want the remote to control.
2.Press and hold the component key (TV, VCR, Etc..) you wish to program. The illuminated ON-OFF key turns and remains on.
3.While holding the component key down, press and hold the ON-OFF key. The illuminated ON-OFF key turns off.
4.After holding down both keys for three seconds, the illuminated ON-OFF key turns back on.
5.Release both keys. The illuminated ON-OFF key remains on.
6.Press and release the ON-OFF key repeatedly until your component turns off. Wait four seconds between each key press. Each time you press the ON-OFF key, the illuminated ON-OFF key blinks and the next code in the list is sent. This process continues until all of the codes in the Code lists have been searched. If your component turns off, you have found the correct code.
7.Once you have found the correct code, you must save the new code by pressing and releasing the STOP key. The illuminated ON-OFF key turns off. You must press the STOP key to save the code or the correct code will not be stored.


Good luck and please rate

Radio Shack or Walmart..

You can buy jensen parts at www.partstore.com let me know if you have an problems.

I would suggest finding the remotes documentation from the remote manufacturers website. You did not mention remotes name. The remote manual will have codes and the website probably has updated codes as well. good luck

JENSEN UNIVERSAL REMOTE