20 Most Recent Jensen 143307 Remote Control - Page 2 Questions & Answers

Please check on the links below and see if they help:

http://www.xdiv.com/remotes/

http://www.hifi-remote.com/ofa/codes-tv.shtml#tv

Hello
Check with [0573]. This is the only code given by Jensen with Samsung DVD. OK

Hi
Codes to check with Daewoo TV with Jensen 300 series remote control are;
477 / 473 / 468 / 465 / 459 / 455 / 453 & 414
OK.

Here are some of the codes still looking for manual
GE VCR: 2000, 2013, 2021, 2022, 2053, 2087, 2089, 2091, 2115, 2120
Mitsubishi TV 0093, 0150, 0178, 0019
JVC VCR 0067, 0041, 0008
JVC DVD 0558, 0623
samsung codes is 1004,1005,1006,1012,1013,1015,1017,1019
Motorola Cable Box: 5000, 5003, 5046, 5047, 5052

Hey there albacorral and welcome to FixYa. I see your television make is a Mitsubishi and you are using a Jensen remote control. Below is a list of codes that I have compiled for you.

0150, 0019, 0093, 0178

Please note if your remote control only accepts three digit codes you will have to drop the first zero off the code numbers that I have provided. Example 150, 019, 093, 178.

I hope you found this helpful albacorral and thank you very much for using FixYa.

Depends on the model of Jensen Remote.

Jensen was a division of Recoton, and Audiovox bough them out some years ago. The current Audiovox website does not keep infornation on older remote models.

http://replay.web.archive.org/20010401224505/http://jensenremotes.com/ is a snapshot of the website from 2001. Is your model listed there? You can access some of the old codes there, or leave a comment with your exact model number.

Some more modern TVs will use codes that older remotes cannot produce.

Hello
Proceedings to programme Jensen remote with TV follows.
[1] Manualy turn on the device you want to programme.
[2] Find three digit code for that device which you want to programme.
[3] Hold the device key down until the green indicator linght come ON.
[4] Release the device key. Within 30 seconds enter the three digit code number of your device.The light will flash when the right code has been entered.
[5] Press the Power Key. If the component turns off, you have entered the right code.
OK.

write a program to take a number print out its factorial value

to manually let the remote find the code as i couldnt find the actual sony code since you didnt list your tv try this proceducure

Turn on your tv manually.
Hold on to the (tv) button and on/off button for the same time for 3 secs.
On/off button will light up.
Push on/off button until the tv turns off. up to 30 or so times
Then push the stop button on the bottom of the remote tosave the config.
please let me know if that works

Hello
Try the following to unlock your Jensen TV.

1. Turn on the TV using the remote control. In most cases, you will need the original Jensen remote to unlock the TV if you aren't sure of the unlock code. You can purchase an original replacement online if necessary.

2. Look at the screen. If you see a red key on the bottom of the screen, press "Function" and "Mute" on the remote at the same time. This will unlock the channel. Do this if you want to bypass the lock to watch a certain show or channel while leaving the TV locked. All other channels will remain locked and the TV will lock again when it is turned off.

3. Unlock all of the channels on the TV by entering 0711 or 3308. These are the Jensen factory reset codes that will reset the TV to the original factory settings. By doing this, you will loose any information that you have stored in the TV, such as channel labels and schedules. You will have to program the TV again by going through the entire initial set up.

4. Call the technical support service number in your owner's manual if neither of those codes work. A technician can help you troubleshoot the television as the problem may not be the parental lock feature. Have the model number and serial number of the TV available when you call. 5. Take your television to a TV repair shop if neither of the codes work and the TV locked by itself while it was turned on. In this case, the TV may need to be rewired. OK.