20 Most Recent
Ricoh Lanier Ld445c Ld435c Ld430c Magenta Developer B223-3023 - Page 6 Questions & Answers
How to solve Ricoh sp 212SNw scanner carriage error
1Press the "Clear Modes" button. This button will be on the main panel of the Ricoh copier.
2Press the "1,0,7" keys in succession. You do not have to hold the buttons down at the same time but need to press and release them in this exact order.
3Press and hold the "Stop" key. You will need to hold this button down until the Ricoh copier enters into service mode. The touch screen display will read "service mode" and three soft keys will appear.
4Press the "exit" button. This button will be on the touch screen display in the upper right hand corner. Once pressed, the copier will return to normal operation mode.
5Turn off the main power. The main power button will be located on the side or front of the copier, depending on which Ricoh model you are working on.
6Turn the power back on. Once the copier is powered back up, the service code will be cleared.
Printer Ricoh sp 210 su in error service call sc556
This is most likely a fuser issue. If you have a spare laying around, I would suggest replacing your fuser. If you have a contract with Ricoh, I would suggest placing a service call for them to come out and look at the machine.
Replace cyan cartridge message
If the message is telling you it is empty, it surely is. If is was a re-manufactured, or refilled cartridge, the chip on it has become corrupted. Replace it with a new OEM cartridge. You may be able to use the old again, after the software accepts the new one.
Model Mp305. What does 'independent supply toner set' mean?
The toner has run out or is about to run out. Replace the cartridge.
Sometimes the message appears if an after market cartridge is used.
It is likely safe to use the machine until it stops providing quality printing. Of course, that may prove inconvenient if it stops in the middle of a print run and you are unaware such has occurred, being occupied elsewhere.
Mp c5502. Why does it keep displaying 'door open' even though it's closed?
Sometimes Door open error shows in printer even if it is closed .Follow This steps to Fix Open Door Error Message:-*Close the cartridge access door completely.*Check the cartridge door for obstruction.*Reset the Printer*Restart the Print Spool Device.*Restart the computer.Restart the Printer.And If you are using Brother Printer And You Encounter With Brother Printer In Error State Windows 10 Issue then Read The Blog I Am Mentioning above.
MP C4503. how can I turn print mode ON in service mode?
if you mean that you can able to use it as scanner only, try to setup printer driver. (you can check too at control panel>>printers & scanners(name may be different due to windows version) if it appear as printer device or not)
How to solve this error SC 553 on a ricoh machine
It depends from machine to machine. on some you just need to enter into service mode and then copy sp or system sp. On other Ricoh machines you need to execute a reset. first of all turn on the machine, and make sure no print jobs are present, or remove the network print or USB print cable and then turn on the machine. This is just to make sure that no print jobs are present, because this will make you to not be able to enter in service mode. This code SC553 also and other similar SC codes like 551,552,544 and etc. are connected with the Fuser unit. Most of the time is just triggered as security for overheat to stop a melting or fire. So if you reset the machine with procedure you may make damage, but in most cases is harmless. But if you reset the SC553 and then after short time reappear than the machine have real problem and need to be fix, do not reset it more than to to times in a row on a short time period. To enter into service mode press the following keys in the following sequence: press the yellow(clear) - then press 1 0 7 (numbers on the keypad) - then press and hold it pressed the red stop button until service mode appear on the screen. when service mode appear on screen enter into (copy sp) or (system sp) depend from the model of the machine. Then with the keypad press 5-8-1-0-# on the screen should appear Fusing SC reset, press execute and after show complete turn off the machine and wait at least 30 seconds, turn it on again. if its ready the sc is clear. But if the sc repeat the machine have a serious problem with the fusing unit and need to be fixed, if you try to reset the machine with this reset to much in short time you may just add more damage. for more detail post the model of the machine.
Not finding what you are looking for?