Top 20
Toshiba e-Studio 3040c RADF Assembly OEM - RADF-Assembly-e-Studio-3040c Questions & Answers
HI! toshiba copier shows error code of C3B0. what is the solution?
That depends on the printers model
One could be;
Check to see if the waste bottle is overfull.
If yes, the waste toner will be backed up into the waste tubes, first affecting the primary transfer cleaner unit, then the black drum cleaning unit, then the color drum cleaning units.
Or;
Developer unit • Check if the developer unit is installed properly. • Check that the developer unit and coupling on the equipment side are properly engaged. • Check that the mixer of the developer unit is rotated. • Check if the developer material is too dark visually. • Check if the amount of the developer material is too large or too small. • Remove any toner or dust on the ATC sensor connector and the drawer connector of the process cover. • Remove any toner or dust on the EPU sensor connector and the drawer connector on the equipment side.
Or;
Auto toner sensor Harness LGC board • Check the connectors and harnesses between the auto toner sensor and LGC board (CN364). • Check if there is any foreign matter such as toner in the connector of the auto toner sensor. Remove if there is and reconnect it.
Why is my Toshiba label printer printing black labels
I suggest to see this pagehttps://toshibaprinters.com/technical_information/errormessages.htmand try the maintenance procedure given in this pagehttp://support.efficientbi.com/knowledge-base/printer-periodically-skips-a-label-thermal-printer-problem/and this pagehttps://www.usps.com/stamp-collecting/assets/images/TOSHIBA_Label_Printer_Cleaning_Instructions.pdfThis may resolve your issue.
Toshiba e-studio 166 printing black pages when copying
If your Toshiba estudio 166 is producing completely black pages when scanning or copying, there are a few potential causes for this issue. Here are some troubleshooting steps you can take to resolve the problem:
1. Check the scanner glass: Open the scanner lid and inspect the glass surface for any dirt, smudges, or debris. Clean the glass using a lint-free cloth and glass cleaner specifically designed for scanners. Ensure there are no obstructions that could interfere with the scanning process.
2. Verify the scanning settings: Make sure that the scanning settings are properly configured. Check if the scanner is set to scan in color or grayscale mode, as well as the resolution settings. Adjust the settings according to your requirements and test the scanning process again.
3. Clean the scanning components: Over time, the scanning components, such as the scanning lamp and mirrors, can accumulate dust or dirt, affecting the quality of the scanned or copied images. Consult the user manual or manufacturer's guidelines to learn how to clean these components properly. Be cautious when handling sensitive parts.
4. Check the toner cartridge: If the printed copies are also coming out completely black, the issue could be related to the toner cartridge. Ensure that the toner cartridge is correctly installed and has enough toner. If the toner level is low, replace the cartridge with a new one.
5. Perform a factory reset: Sometimes, resetting the device to its default settings can resolve issues. Locate the factory reset option in the printer's settings or refer to the user manual for instructions on how to perform a reset. Keep in mind that a factory reset will remove any custom settings you may have configured.
6. Update firmware and drivers: Visit the Toshiba website or contact their customer support to check for any available firmware updates or driver patches for your printer model. Keeping the printer's firmware and drivers up to date can often resolve various performance issues.
If you have followed these troubleshooting steps and the problem persists, it may be necessary to contact Toshiba's customer support or consult a printer technician for further assistance. They will have specific knowledge and resources to help diagnose and resolve the issue with your Toshiba estudio 166.
Please my toshiba printer shows call for services and I press I press cancel and 8 is not showing code please what can I do
I can try to help. When the printer displays "call for service," it usually indicates a significant issue that requires a professional technician to address. However, you can try a few basic troubleshooting steps that might resolve the issue or reveal the error code to better understand the problem.
1. Power cycle the printer: Turn off the printer, unplug the power cable from the wall outlet, and wait for a few minutes. Plug the power cable back in, and turn the printer back on. This might clear any temporary errors or abnormalities.
2. Check for paper jams and remove any foreign objects: Open the printer's covers and inspect for any paper jams or foreign objects that might obstruct the printer's functionality. Remove any issues found and close the covers.
3. Update the printer's firmware: Check the manufacturer's website for any available firmware updates and follow the appropriate steps to update the firmware on your printer.
Toshiba e-studios 5540c C390 C3A0
The C3A0 error code in a Toshiba e-studios 5540c copier usually indicates a problem with the magenta color developer unit. The C390 error code is a general error code that is usually displayed when a specific error cannot be determined.
To troubleshoot the issue, you can try the following steps:
- Check the connections of all the units, including the magenta developer unit, to make sure they are securely in place.
- Clean the sensors and contacts of the developer units and the main controller board.
- Check for toner or other debris that may have accumulated on the sensors or inside the developer units.
- Make sure the developer units are properly loaded with toner and are functioning correctly.
- If the issue persists, it may be necessary to replace one or more of the developer units or the main controller board.
If you are not comfortable with these procedures or the issue persists, it is recommended to contact a professional technician
It's possible that the EPU tray may have come loose during transport, leading to a C390 error
Not finding what you are looking for?