20 Most Recent Dell W3706MH 37 in. LCD HDTV - Page 2 Questions & Answers

There could be any number of things wrong with it based on the information that you provided. A qualified technician can take a look at it and give you an idea of what might be wrong with it.

It is likely that the power supply filter electrolytic capacitors have failed in the monitor. Either replace monitor of have a qualified technician troubleshoot the device.

Replace the main board.

The sustain boards need to be replaced in pairs. I replaced just the bad one before and ended up burning out the other old one and the new one aswell If you need further help, reach me via phone at https://www.6ya.com/expert/steven_a67ead41eb5fc62a

English!!

Hi there, Try connecting the laptop with the same VGA cable to a PC monitor. This will tell you if the problem is with the TV or the VGA output from your laptop. Make sure there no bent/missing pins on the 15-pin VGA connector ans cable.

Contact kodi support.

online search ore off road truck accessory shop or some auto stores

you can get one here Dell 50 W5001CHD LJ44 00109A Power Supply Board Unit eBay

Why not, you need all the resources you have to run other programs.

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily. http://homenol.blogspot.com/ http://remotesearch.blogspot.com/ http://electronicshelponline.blogspot.com/ http://electrohelponline.blogspot.com/ Programming Notes • If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote. • Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality. This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.

There are two methods to reset. Hard reset and factory reset. To make it a hard reset just unplug the set from the AC mains wall socket and reinsert after an hour or so. To do a factory reset, you have to enter it's service mode. http://electronicshelponline.blogspot.com/ http://homenol.blogspot.com/ Visit these sites to get more details. Service mode entry procedure of many popular brand sets are given in detail.

If you wish to get some details; visit the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ Circuit diagrams of SMPS section of many popular brand devices are given. Search the site by type in the "brand name" of your device, in the "Search box at the top right of the Homepage" to get gathered related posts.

Contact the authorized service center for DELL. http://electronicshelponline.blogspot.com/ http://electro-medical.blogspot.com/

The main power supply regulator section circuit fault. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size. Search the site by type in the "brand name" to your device; in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.

The screen has no devices connected to it that can show a picture on your screen!

If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/

These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. http://electronicshelponline.blogspot.com/ If blinks continue without any pause, the main board is faulty. Search the site by type in the "brand name" to your device, in the "Search box at the top right of the display window of the Homepage" to get gathered related posts

There is no such word as colour is color so learn wtf you're talking about.

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily. http://remotesearch.blogspot.com/ http://electronicshelponline.blogspot.com/ http://electrohelponline.blogspot.com/ Programming Notes • If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote. • Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality. This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device. Search the site by type in the "brand name" to your device; in the "Search box at the top right of the display window " to get gathered related posts.