20 Most Recent D-Link 802.11g Wireless Router WBR-1310 (WBR1310) - Page 3 Questions & Answers

First read RESET a routerThen the factory defaults username is admin, and there is no password.

Please contact your ISP provider.

Press and hold the reset button of the router and use the WEP or WPA located at the bottom sticker.

RESET YOUR ROUTER HERE IS HOW

have u cheeked under the router and behind the router

Problem info or errors?

my code is JUUR

Connect a LAN cable from the D-Link to your laptop/computer's LAN port, open the browser on your laptop/computer and enter the D-Link's configuration URL.. http://192.168.0.1 The default login = admin The default PW = blank (just press Enter) You can now change the default admin password. You can now configure the wireless settings. (WPA or WPA2 encryption) Now configure the wireless card in your computer/laptop with the router's wireless settings. To secure your wireless network from unauthorized access, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

i just bought a adaptor from a friend of mine its brand new and where do i have to look for the security key?

Connect a LAN cable from the D-Link to your laptop/computer's LAN port, open the browser on your laptop/computer and enter the D-Link's configuration URL.. http://192.168.0.1 The default login = admin The default PW = blank (just press Enter) You can now change the default admin password. You can now configure the wireless settings. (WPA or WPA2 encryption) Now configure the wireless card in your computer/laptop with the router's wireless settings. To secure your wireless network from unauthorized access, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

This is a question you best address with D-Link directly. Go to their site and use their email to send them a query about your problem. They seem quite quick to respond with very helpful suggestions.

hi1 first you make hard reset to the routerthis can be done by pressing the hard reset on the router for 10 second2 put the disk of thr router and follow the instruction3 you will be asked if you want a pasword or not4 there you put your new password bernard http://www.rylwy.com/

hither are 2 way 2 change your password1 go online to the provider homepage : you can do it there2 call your provider and he can do it online with youbernardhttp://www.rylwy.com

hither are 2 way 2 change your password1 go online to the provider homepage : you can do it there2 call your provider and he can do it online with youbernardhttp://www.rylwy.com/

hiTry the modem on anather computerIf the problem still exist - i have a filling that the problem is comming from the internet provider bernard

Push a pin into the reset hole at the back of the router for about 10 seconds.Now the default username is (admin) and the default password is (admin).If that wont work then leave the password field blank, and only enter (admin) as the username. Remember no brackets.

you need to setup WPA2 password for your network to access.

Download the driver and manual from the manufacturer site.