20 Most Recent Sony BRAVIA KDL-32S2000 32 in. LCD HDTV - Page 8 Questions & Answers

Standby light blinking is sign or internal problem in tv and how many times it blinks is error code that will show what section of tv got problem. Count light blinks and let me know, there would be 3 seconds long pause in blinks so count pause to pause.

Take it to a repair shop, the image processor is dying and the entire motherboard must be replaced by a professional.

If this is a new TV then don't even bother trying to fix it, get it back to the store and get them to fix or replace it. It should be under warranty and there is no way it should have any problems out of the box. The other side of that is if you try to fix it or have someone fix it they can cancel your warranty.
There should be no problem with the return and then you will have a new properly working TV instead of a repaired one that you won't really trust that much.
The symptoms would indicate a problem with the power section and perhaps other issues. Not cheap to fix and not acceptable in a new tv.

Unplug it for about 1/2 an hour and try again, if no change then you will have to open it up.
If you are going to DIY and have proper tools and know safety precaution then please read on:

Please see my basic troubleshooting guide here:
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide

http://s807.photobucket.com/home/budm/allalbums

http://en.wikipedia.org/wiki/Capacitor_plague

Parts: www.shopjimmy.com

Back light inverter is mounted on left side of lcd panel if you see it rear and subject board would be covered with some shield. Remove screws of shield and circuit board, unplug connectors and take it out. Put new board, plug connectors, tight screws.

Not repairable,because the screen panels replacement will cost the same as a new tv.The screen panels are limited produced buy the tvs industries.U only can buy the screen panels from them,that what they charge,because the screen panels are the 90% of the tvs.Sorry the tv,not worth repairing.Not worth as a whole tv anymore,only for the electronic's boards for the boards parts that it.

Please read my guide here so you know where to start.
Please see my basic troubleshooting guide here:
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://s807.photobucket.com/home/budm/allalbums
http://en.wikipedia.org/wiki/Capacitor_plague
Parts: www.shopjimmy.com

sony site will let u download owners manual

try turning down the backlight intensity

If you hook up component from cable box you must hook component in put at TV also.

Yes, you can up grade software first. Go to http://esupport.sony.com/US/perl/swu-list.pl?mdl=KDL42V4100&LOC=3#div_pos_30

does it have a 21 pin scart and or s 5 pin plug you can buy these cables.

You can record by hooking-up video cables from TV video out or Cable/SAT box video out to VCR or DVD video inputs.

The format from the PC needs to be an HDTV format: 480i, 480p, 720p, 1080i or 1080p. Other formats will generally not work. You may need to get the latest drivers from your video card manufactures website to correct the problem. I hope this was helpful, best wishes.

the time or the limit of the program is not applicable because it is not touched.

Click here its the link to the manuals for your tv to download. If i helped please leave me a rating.

Take out the batteries there a screw behind it take that screw out.Must take something sharp like a nife.Pride it out all around the remote for lases.Clean the remote with some rubbing alcahol.

It automatially adjusts to the signal it is getting. You have to be connected via HDMI to a source that is putting out 1080P (Blu-Ray, Playstation, etc)

Peace,

You may want to recheck your settings.Sounds like you may have it set to Zoom or Wide Zoom.