20 Most Recent
Sony BRAVIA KDL-40S2000 40 in. LCD HDTV - Page 8 Questions & Answers
Sony Bravia KDL 40X2000 HDMI both cutting out
Sounds like a handshake problem with the HDMI outputs on the devices. I have never seen BOTH HDMI inputs have the problem. It could be a problem in the TV where the HDMI signal is processed or the HDMI jacks may have been stressed and this is why you have an intermittent problem. By stressed I mean that the jacks have been bent by inserting the cables wrong or pulling up or down on the cables when they were plugged into the unit.
LCD display cracked
id put my **** in my *** and cough out a nut
1600$ i could pay a ***** 16 time to but a nut and lick
my booty hole
Sony KDL-46s2010 4 red light blinks
I would suspect one or more of the miniature flourescent backlight lamps. One way to confirm this would be to power up the set with a grayscale image at 40 to 60 IRE. If one or more lamps is failing to light, a slightly darker horizontal area in the grayscale will give it away. Unfortunately, Sony will not supply any of the backlight components apart from a new LCD panel. Sorry.
Codes for kdl 32l500. is not work.
0286,0274,0299,0000,0829. Check these codes.
If you wish to get more details, check this
site. Pull up previous posts
there. Setup code list and
setup proceedings to many popular brand remote controls are given. Three digit, four digit, five digits and
two-digit code list are there. Check
the site with patience. Surely you'll
get a solution to your problem. Search
the site by 'Timeslide' option. It will
make search easy. Or, type in the brand
name to your device into its search box, and press "Enter"
Sony bravia kdl-40s5600 are on st by and red led flashing three times
Over voltage protection is going on. If you wish to get more details, check
this site.
Pull up older posts there. Check the site with patience, as it has over
2250 posts now. All are related to
electronic equipment repair help.
Search the site by 'Timeslide' option.
It will make search easy. Or,
type in the brand name to your device into its search box, and press "Enter"
I have same tv but the on/off button has broken and cant start the tv
On some models, there's a plastic piece which pivots, pushing the actual button itself. If you can take the back panel off and inspect it, you may find you can replace the little piece of plastic with something similar or use super glue to fix the button itself. Or you might be able to swap out the "info" button (or some other button you don't use as much) with the power button
How do i connect my soni bravia television to internet
Hook up a computer to it. The tv could have an hdmi connector or monitor connector (check the back of the television to see which type of connectors you have available) so just plug a cable in from your pc to the tv. For sound, a simple computer cable plugs into the headphone jack of the computer to the back of the television. If you have a PC, you may have a series of connectors for stereo surround sound systems (like a sound card). I use a simple jack that plugs into the headphone jack (stereo speaker jack) and also plugs into the pc audio in port on the tv. Now I just select the input (pc) from the sony menu and select the option for sound input and voila. As long as the pc is connected to the internet, your tv is your new monitor.
Digital signal keeps dropping out
The problem post you placed here has no sufficiant details to post a solution. About which voltage rail do you refer with? Provide more details please. If you wish to get more details,
try this link.
Light flashes continuously even at night
The II2C data bus is busy. You have to check its main system control board for fault. This is a skilled work. If you wish to get more details about these blinking codes,
check this link.
If you are not familiar with electronics, do not attempt to
repair. Whether you suffer fatal electrical shock!
Instead, contact the nearest service center.
Not finding what you are looking for?