Top 20
Sony BRAVIA KDL-V32XBR1 32 in. LCD HDTV Questions & Answers
My Sony Bravia 32" flat screen tv will not stay on
Fault at its main digital board.
Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Pull up older posts.
https://electronicshelponline.blogspot.com/
In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.
Before going further; try a hard reset first. If it does not help you, replace the main digital board. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; visit the site linked here.
No picture, vertical colored lines
I have never heard of a warm-up problem on a digital television. Unlike the old CRT TVs and monitors, digital panels don't have to warm up. I would go with the TV repair persons assessment that you've got a bad panel.
How to change channel from one to any one channel
I need more info. Are you using antenna connected to RF input or are you using cable box, sat box or ATT Uverse? If connected to antenna . go in menu or Home on Sony. Press setup and look for channel scan. Set to antenna and do auto scan. If cable or other provider box set tv to ch 3 or what ever provider says. You are then using the tuner in that box. You will use providers remote to change channels. Be sure in setup that tv is set to cable if cable box is used. Hope this helps but the info you posted could be more descriptive.
Sony KDL32CX520 red light blink 5 times
IKR Error at power on 05. 5 blinks denotes this. Actually, the fault is related to its main digital board, and the work will not an easy one. Anyway,
http://electronicshelponline.blogspot.com/ check this link.
Pull up previous posts there, either by its left side bar,
or view it in Timslide option, and see whether there is something to help you. If you're not sound in electronics, no need to proceed. Contact any service technician or authorized service centre for Sony.
Tv guide doesn't work anymore
I have a Sony model KDL-32BXR6 that the TV Guide first
showed no listings this past weekend.
Last night when I entered the Guide the screen displaying the
Setup/Display Setup Progress came up stating "In Progress". Same thing this morning. Something must have changes with the input signal
if this occurred with two different sets.
Sony KDL-V32XBR1 Displays only snowy picture
Here are a few more troubleshooting steps you can try when your TV picture is just snow. I see that you have already rebooted your TV, but did you turn your set-top box off and on, too?1. Does the picture show when you play a DVD? 2. Check all of the connections between the TV, outlet and set-top box and make sure everything is secured.3. Is your TV set to the correct channel (typically 3, but in some areas 2 or 4)? 4. Press any key on the remote to see if the correct mode lights up. (Ex: if you have cable, the cable button should light up). If it doesn't, press the correct mode's button to regain control and change channels.5. Call your service provider and make sure it's not an overall service outage. 6. Do you have sound but no picture? If so, it could mean a backlight failure.For more suggestions, see
TV black screen or snowy screen for troubleshooting and solutions. I hope this helps!
Not finding what you are looking for?