20 Most Recent Sony DVP-NC85H Multi-disc DVD Player - Page 8 Questions & Answers

Hold down the play button, it will take a bit but it turns of the child lock

Sony Televison &... | Answered on May 26, 2019

Hello Dennis, please indicate, which device is connected to your Sony projector, indicate brand, model and type of device (DVD, VCR or other)
This projector has 3 Video inputs, two color inputs separately (Component Video) and one Composite video
I suggest you replace the cable between the projector and the image source and check if the problem is corrected, if you do not have another cable, try to connect some video signal to the Composite video input and see if it is missing the red color, If so, you would have a problem in the projector, if it looks good, the cable would be wrong
I hope you manage to solve the problem, comment the results
Greetings Franco Dosil

Hola Dennis, por favor indica, que aparato esta conectado a tu proyector Sony, indica marca, modelo y tipo de aparato(DVD, VCR u otro)
Este proyector tiene 3 entradas de V?deo, dos entradas de color por separado (V?deo por Componentes) y una de v?deo Compuesto
Te sugiero que reemplaces el cable entre el proyector y la fuente de imagen y compruebes si se corrige el problema, si no cuentas con otro cable, prueba conectar alguna se?al de v?deo a la entrada de V?deo compuesto y observa si esta faltando el color rojo, si es as?, tendr?as un problema en el proyector, si se ve bien, estar?a mal el cable
Espero que logres resolver el problema, comenta los resultados
Saludos Franco Dosil

Sony Televison &... | Answered on May 24, 2019

You have this backwards. The applicable code would be in the URC, if it is compatible.

Sony Televison &... | Answered on May 21, 2019

if possible. reinstall your vcr code in your existing remote.
consider using another remote [ set to your vcrs code ] -- remotes sometimes low cost at dollar / thrift stores.

Sony Televison &... | Answered on May 20, 2019

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
Programming Notes
• If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote.
• Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality.

This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.
Search the site by type in the "brand name" to your device; to which you want set-up codes; in the "Search box at the top right of the display window" to get gathered related posts.
{View the site in web view by Mobile or a desktop to see the search box. Mobile view has no search box.}

Sony Televison &... | Answered on May 17, 2019

It will be difficult to make a Blu-ray player region free. Anyway, visit these sites, and see whether there is any information about this.

Sony Televison &... | Answered on May 17, 2019

2time is over voltage error so please replace main board
Muhammad Nasir

Sony Televison &... | Answered on May 16, 2019

Hi Laurence, from what you describe, it would look like a power supply failure, like you say a loose solder
I recommend that you be careful with the manipulation of the source plate, since there may be loads in the capacitors
When you remove the back cover, locate the plate of the power supply and look for the input capacitor (s), to discharge them, then carefully check the solders that may be loose or cracked
Also note the low voltage capacitors, those on the secondary side of the source, that are not swollen or with the top open
After reviewing and resolving the source components, reassemble and test
In some models, you also have on the Main board, small subfuentes, try to locate and review them
If after doing all this, you do not have positive results, look for a specialized technical service
I hope you can solve the problem
Greetings Franco Dosil

Hola Laurence, por lo que describes, parecer?a una falla de fuente de alimentaci?n, como tu dices una soldadura floja
Te recomiendo que tengas cuidado con el manipuleo de la placa de fuente, ya que puede haber cargas en los capacitores
Cuando retires la tapa posterior, ubica la placa de la fuente de alimentaci?n y ah? busca el o los capacitores de entrada, para descargarlos, luego revisa minuciosamente las soldaduras que puedan estar flojas o agrietadas
Tambi?n observa los capacitores de baja tensi?n, los del lado secundario de la fuente, que no se encuentren hinchados o con la parte superior abierta
despu?s de revisar y resoldar los componentes de la fuente, vuelve a armarlo y prueba
En algunos modelos, tambi?n tienes en la placa Principal, peque?as subfuentes, trata de ubicaras y revisarlas
si despu?s de hacer todo esto, no tienes resultados positivos, busca a un servicio t?cnico especializado
Espero puedas resolver el problema
Saludos Franco Dosil

Sony Televison &... | Answered on May 15, 2019

Hello Paula, do not have video, nor sound?
I send a link of support to the Sony user, on the model of your TV
If you follow all the steps and do not achieve positive results, get close to a specialized technical service
I hope you can solve the problem, comment if it was
Greetings Franco Dosil

Hola Paula, no tienes video, ni tampoco sonido?
te envio un link del soporte al usuario de Sony, sobre el modelo de tu televisor
Si sigues todos los pasos y no logras resultados positivos, acercate a un servicio tecnico espeializado
Espero puedas resolver el problema, comenta si asi fue
Saludos Franco Dosil


Sony Televison &... | Answered on May 15, 2019

try this

Using a RESET button
  1. Locate the RESET button on the camera. NOTE: ...
  2. Use a pointed object (like a ballpoint pen) to press and hold the RESET button for 2-3 seconds.
  3. After 2-3 seconds has elapsed, release the RESET button.
  4. After the camera reboots, the time and date settings menu will be displayed.
Apr 11, 2018

How to reset or initialize a camera back to original factory ... - Sony


If not, you need to send for repair


Sony Televison &... | Answered on May 14, 2019

Not finding what you are looking for?
Sony DVP-NC85H Multi-disc DVD Player Logo

41 questions posted

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76115 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1691 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Sony Televison & Video

  • Sony Televison & Video

Most Popular Question

just bought dvd player used without

  • Televison & Video