20 Most Recent Oster 6812 / 6813 / 6814 16 Speed Blender Questions & Answers

TIME FOR A NEW BLENDER! CUT YOU LOSS IF ANY AND GO GET THE NEWEST MODEL FOR CHRISTMAS! CHEERS!

I didn´t find it with google. Maybe ask the experts from manualfox.com - if they don´t find it, it does not exist.

It sounds like overheating or a control board failure. Contact the maker for a warranty claim https://www.google.com/search?q=Sunbeam+sfs001+manual ..

Same thing happen to my blinder, it uses 5A fuse 250V. But even if you replaced the fuse it still blow up... some other issue related that make the fuse blow

check the operator manual - and see the parts breakdown picture. the sequence of parts to remove to replace it would be evident from the pictures.

Hello, Frances - Your question landed in the Fixya.com category of Furniture. I re-categorized your question to the Oster Blenders category. I found the following information regarding Oster blender built in fuses: (Quote) The built in fuse protection has kicked in. To turn the blender back on, first turn the control knob to "Off" and unplug the unit from the wall. Then remove the jar from the base and free the blade of any obstructions. Next, press the external resettable fuse button on the bottom of the base. Wait 30-45 minutes for the unit to cool. (End quote) Source: https://www.oster.com/service-and-support/product-support/product-faqs/blenders/oster-versa/blenders-oster-versa-faq.html?faq=blenders-oster-versa-faq-Q-A-4 Question: My blender shut off during use. What happened? If you try that possible solution and the blender still does not start, then . . .this is the link to the Oster Contact Us page: https://www.oster.com/customerservicecontact?cid=contactus At the very bottom of the page you will find toll free Customer Service phone numbers. Or . . . Fill in the form there, asking about the availability of a replacement fuse for your model of Oster blender, so that you can send an email message. Best wishes.

Sorry we do not have parts locators services here.

there are compaies around that sell seals , bearings and "O" rings see if you have such an operation in your state and contact them with the measurements of the seal

Get it touch with a local Oster repair guy. Likely he can solve your problem, over the phone. You may need to take it to them.

I do believe the motor must have burned out.