Jensen VM9020TS Car DVD Player - Answered Questions & Fixed issues

did you get it fixed? i have the same problem

If there is a reset switch, it will be a pencil tip sized indentation on the face, It will not be marked. If there is no reset switch, you can reset the radio by disconnecting the battery for a few seconds.

jensen.com

Hi,

As it's illegal to view your screen while the vehicle is in motion, DVD players are required to be connected to your park brake switch, so viewing can only occur when the park brake is applied.

From what you have described, I suspect the wiring (or switch) connecting to your park brake switch, may have a short, or the switch itself may be faulty.

Hope this helps....

to fix your problem cut the wire in half connect it to a ground and hot and there ya go it fixed my problem

Please try to put in an ordinary audio CD track and see if this is detected. If yes the optical is working, if not there is no laser scanning and the possibility of the head being faulty is high.
Now certain cleaner disks are not read and so will not be tracked.Try to open and do a cleaning manually of the laser head eye with a cotton bud very softly and without any pressing of the lens eye.
make sure that the Cd is loading into the drive and sets into the head if not the loading mechanism has some errors and must be reset for proper loading into the slot. possible obstruction or dirt accumulation must be checked.

se baja enyran do al menu i la configuracion

It happens the same to my unit. Jensen service charges around 130 + shipping, which is a third of the price of a new unit. Anyone else that have fixed this issue...?

turns on and off constantly

If there isn't a fuse on the back of the unit, you fried it.

htere is no general password, look in the owners manual

If I understand you, this is a dvd head unit. That means that there is a wire that will need to be put on the parking break in order for it to work. Be sure this wire is connected.

you are probably mising to power on the factory amp from the vehicle

hi! press the audio setting and set on the audio set on

the audio format may not be supported...if the files are supported than it might be the file protecting switch (dont know exactly what its called.) if not then i apologize thats passed me...

AI HAVE A SCREEN FOR 100 USD.LETME KNOW

I HAVE ONE SCREEN FPR YOU 100 USD LETME KNOW.
[email protected]

Change the audio amplifier IC

connect to you reverse light circuit dont guess it have an proper installer do it for you

replace cd reader is bad