20 Most Recent
KitchenAid 23 in. KUDD01DPPA Stainless Steel Dishwasher - Page 7 Questions & Answers
How to remove a lower panel on kitchenaid kds 18
HOW OLD IS IT AND NEED FULL MODEL #. In general undue screws at bottom kick plate and lift upward and it should come off. but some older models also have screws in the top of the panel that must be removed to get the panel off.
Kitchenaid dishwasher doesn't drain. Could it be plugged? How to clean?
First, remove internal filter below the bottom rotor. Work carefully so you can reinstall. If you have a wet/dry vac, shopvac, remove the filter bag and then suck out the water and clean the bottom of the machine. ( the sump, the low spot inside the appliance. ) Sometimes a popcorn husk or a bit of glass or plastic can get by the filter and clog the pump. The sump is designed to retain a little water between cycles to keep the seals wet so don't worry if there is a bit left after a cycle. (not enough to cover the bottom but a 1/2 cup or so). If this doesn't solve you problem, check the drain hose from end to end. Sometimes it can get too sharp a bend or plug at the sink end.
10/23/2018 12:17:06 AM •
KitchenAid...
•
Answered
on Oct 23, 2018
Not finding what you are looking for?