20 Most Recent Kenmore Oasis HE 27082 Top Load Washer - Page 3 Questions & Answers

Can you post the whole model number?

The timer turns the water on to fill, the pressure switch turns it off. If the water contacts are welded together (can happen over time) then the water solenoid will be on all the time. Easy way to check. Unplug the unit, then remove the electrical plug from the water valve (hot or cold depending which one is causing the issue) plug unit back in. If water stops filling the timer is bad. If the water does not fill then the timer is fine, but the water valve solenoid is bad.

valve stuck, disconnect hose and clean debris inside the valve

Horrible, horrible, horrible expensive machine. I finally had to buy a really cheap machine as a substitute, and it works perfectly. Sometimes expensive does not mean quality. Sorry!

Re-balance the load, and re-try.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Hello there:
F1 = Pressure signal Out-of-Range -
fixes:
+Check pressure hose connection from tub to machine/motor control. Is hose pinched or kinked?
+If F then 1 repeats numerous times after POWER is pressed and the pressure hose connection is not pinched or kinked, then unfortunatly you are going to have to replace machine/motor control.

Read more: Need help ASAP (Kenmore Oasis) - The Laundry Appliance Repair Forum - Do-It-Yourself Appliance Repair Help - ApplianceGuru.com: The Samurai Appliance Repair Forums http://applianceguru.com/forum2/18981.html#ixzz1BErn5TM6
Get appliance parts at http://parts.fixitnow.com