20 Most Recent Sanyo PLC XU48 Multimedia Projector - Page 3 Questions & Answers

Not possible, this pedal plugs into the transcription machine and is not meant to be used with a computer Check Ebay if you need transcription machine

replace the ballast board for the lamp. The wires from the bulb connect directly to it, so it shouldn't be too hard to locate Try here to see if they have the part you need. TV Parts Universal TV Stands DLP Chips ShopJimmy

Sanyo PLC XL50 Projector Filter Cleaning Guide If you wish to get some details; check the site linked here. Pull up older posts. http://electro-medical.blogspot.com/

If you wish to get some details; check the site linked here. Pull up older posts. http://electro-medical.blogspot.com/

Fault to the main power supply regulator section. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts. http://electro-medical.blogspot.com/

These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. http://electronicshelponline.blogspot.com/