20 Most Recent
Panasonic Viera TC-P50S2 50" Plasma TV - Page 7 Questions & Answers
Tuning television
not enough signal to produce a digital picture of you are not subsubrised to it
No power
You Need a new power supply board or replace the blown caps on the board. Cheap fix, easy to do.
How to reset pin for facebook on viera
We recommend you use the below link to assist you with resetting the TV and its pin code on the Facebook app.
http://shop.panasonic.com/docs/how-to/2013/tv/reset-procedure/How_to_Reset_your_Panasonic_Viera.html
How to reset pin code for Facebook on my tv
We recommend you use the below link to assist you with resetting the TV and its pin code on the Facebook app.
http://shop.panasonic.com/docs/how-to/2013/tv/reset-procedure/How_to_Reset_your_Panasonic_Viera.html
Won't power on ,
With 10 blinks it could be any of the following boards, the blinks tell you that is is a power problem
A-Board TXN/A1LPUUS
SC-Board TXNSC1LPUU
SS-Board TXNSS1LPUU
P-Board ETX2MM806ASH
TV cuts back off after I turn it on
It sounds that the start voltage to SMPS [Main power supply regulator board] has some problem. It should be checked. Check and replace damaged component/s at it main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Viewing it in "
Mosaic" or "
Magazine" will make surf easy. Surf the site with patience. Pull up older posts.
http://electronicshelponline.blogspot.com/
It will be best to replace the power supply regulator board as card basis.
Not finding what you are looking for?