Dell 924 All-in-One InkJet Printer - Answered Questions & Fixed issues

It is a file format

http://www.webopedia.com/TERM/F/foobar.html

Push menu on your printer, then fin maintainance. Then go to clean printer and push the green button. It will clean the cartridges for you and that should help. 

OCR is a software provided by Dell to convert a scanned document to editable text(word) document. If you scan without OCR software, printer will scan it as a Picture and you can not edit it.

Now here is your answer.
When you install Printer CD, it also install OCR software (Abbyy Fine reader) along with it.
You might have uninstalled the printer drivers and reinstalled them by downloading it from Dell support site.
I must tell you that Downloaded drivers from Dell site DOES NOT contain OCR software.

Solution:
1. You can download free trial version(15 days) from Abbyy.com
Click here to download

2. If any of your friend or relative have printer listed below then you can use the same CD to install the OCR software.
List: Dell 924, Dell 926, Dell 928, Dell 944, Dell 946, Dell 948, Dell 964, Dell 966, Dell 968.

location on Disc:
D:\OCR\setup.exe

3. You can scan using MS Paint.
Click on Start > All Programms > Acccessories > Paint
Click on "File" on Top left corner.
Click on "From scanners and cameras"
Click on "Scan"

It should be able to scan.

4. If you want to use Dell All In One Center.
You can disable OCR option for scanning and it will scan as an image.

Open Dell All in one center.
Click on Advanced scan options Under scan,
Uncheck "Use OCR software".
Click OK and try to scan again using Dell All In One center or using the printer operator panel.

Please revert for any further assistance.

There is no A10 printer , the AIO stands for All-In-One. So i'll assume you have the 924 model.
First make sure the printer itself is functional: shut it down, disconnect it from the pc, start it and use it to scan and copy a file - just press the Start button.
If it doesn't work then the printer is effectively dead - the damage is in the procesor and to replace iot would cost more than a new printer.
If it works then there is something wrong in the setting from the pc. In that case the first thing you should check in Start ? Control Panel ? Printers and Other Hardware ? Printers and Faxes ? Double-click Dell Photo AIO Printer 924, and then click Printer ; in there make sure a check mark is not next to Pause Printing. If a check mark is next to Pause Printing, click Pause Printing to clear it. If it's not then the driver and the associated utility have been corrupted: uninstall it from Add/Remove Programs, reboot , manually wipe all the remaining Dell folders reboot one more time and reinstall them.

Still Blinking: Remove both the Cartridges take a Paper Towel turn the catridges direction so that u can see a Copper plate with small boxes on it....... Just wipe it twice or thrice with the Paper Towel.......... Now insert it and Power on the Printer and see whether u have the same error message if still it gives the same error message..........Get the catridges replaced......
Good Luck...........

Look on the back of the printer and enter the service tag number here;\http://www.dell.com/en-us/shop/partsforyourdell/index?~ck=mn It usually gets the original part number for you. Or call Dell directly: 1-877-717-3355

Click start, all programs, Abbyy Fine Reader. Click on Language and select the language you want the OCR Program to use.


Rick

Hi ,
if you are getting the msg color cartridge missing , maku sure that it is compatible with your printer , on the cartridges you will get the part no M4646/J5566 , look for those part no's and if it is giving the error msg on the LCD display of the printer , try using the old cartridge ...try the following steps
1) put the old cartridge in and then unplug the power adapter (Black box ) from the printer.

2) wait for 30 seconds and put back the power adapter and turn on the printer, and look for the msg on the printer display. if it gives the same error msg with the old as well as the new color cartridge then its an issue with the printer , and if it does not gives the error msg with the older one then its an issue with the cartridge and if you have purchase the cartridge from dell online/phone then call them back give the order no of the cartridge that u have purchased and they will replace it.

good luck..

Completely disconnect this unit. Power, usb etc. hold the power button for 30 seconds. (it obviously won't turn on, but humor me) Then open all the doors on the unit, paper jam, ink cartridge access, and ink cartridges also/ etc. Close all doors again, then connect to the computer, then the power, then power on. If the problem persists, you broke the sensor or it's little plastic tab, which might not be worth replacing.

You can try this free online ocr to convert image to text.

Well the best way is to get a Hanes manual for your make and model at an auto parts place . It will show you all the wiring diagrams and color coding. Use to be about twenty bucks but that is the cheapest I know. Could be something online but not sure. You could get the harness wiring from junkyard and get the right colors and even see how it is routed

anonymous, The only manuals that are available are listed at the link below. Dell 924 Printer Manuals http://dell.to/1Di75BB Thank You, Dell-Jesse L Dell Social Media and Communities

Yeah there should be a screw around it its used to get the belt out or to tight it

I had the same "unsupported ink cartridge" thing going on with hp until I got fed up and uninstalled the hp software and just used my windows devices and printers. Windows will automatically find drivers for your printer and you should be able to choose how much of that software you want to download and install. Eventually I did get some software from hp but I still use Windows fax and scan. When I had a chance to participate in a questionnaire, I made it plain to hp that it's my printer, my ink, my cartridges and I'll do what I want with them. I'll take them out and use them for a planter if I want! In the meantime, I do expect them to print with whatever I put in them. It might not be as good a quality as the original, but it's still my right.

These machines can be problematic. They are old. Pick up rollers is the common issue. Remove the tray and look up into the machine and you will see the rollers. If they have a slick place on them, replacing them will probably solve your problem. Also make sure the paper path is clean from any paper dusk and or small bits of paper. Doesn't take much to cause a jam.

Hi, If you printer not show normal mode then go to run and type printer spool. If not solved then go to control panel and Administrative Tools and click services option and search print spooler stop and start. I hope solved you problem. If not solved then one time printer off and some time wait and restart. If more problem face then contact good printer support technician. TechSupportPrinter Thanks.

use ciss to printer, which we can minimize 90% cost when printing. Everytime purchasing cartridge always cost high because of cartridge package and its chip.

Inkjet printers need to be used frequently to prevent ink drying out and blocking the print head nozzles. If the print head cleaning maintenance routine does not clear the blockages, then print head needs replacing, but it may be expensive. It may be more cost effective to buy a later model and better printer than replace the print head.

Set the DRPD in the settings to 9600 and then try send a fax ...

how do you take out ink cartridges