Xact Communication 22 CHANNEL FRS/GMRS 2-Way Radio - Answered Questions & Fixed issues
HOW DO YOU TURN ON
First make sure it is charged then press and hold the power swich for about 2~3 seconds do not let go right away as the first of power up will put you in the time set /program mode.
Hutch
2/27/2011 5:16:32 AM •
Xact...
•
Answered
on Feb 27, 2011
•
104 views
Cannot charge the battery for a xact model x2x
You will need to run a wake up charge into the battery. The best way to do this is with a 6v lantern battery with 2 wire leads just put + to + and - to - by tickling the contact plates on the battery (do not hold the wires on for more than 3~5 seconds. two times should do the trick ,then put the battery back in and right back on the xact charger plug and it should start to accept the charge.I just did 4 of them that were out of use for 5 years and all came right back to life.
Hutch
2/27/2011 5:05:20 AM •
Xact...
•
Answered
on Feb 27, 2011
•
383 views
We need a battery XB 12
Do a search on eBAY. There are lots of second source batteries there and they seem to be decent quality. I have bought many for all sorts of devices from these venders.
2/3/2015 7:19:21 PM •
Xact...
•
Answered
on Feb 03, 2015
•
94 views
Hello, where can I get wall charger for Xact x2x
your device should be marked with polarity and voltage requirements. Any power supply with the correct plug meeting those specs (if amperage isn't marked, look for one that is between 500- 1000 mA) should be fine. MAKE SURE it is a DC supply if the device you are using is marked DC.
10/23/2013 3:32:50 AM •
Xact...
•
Answered
on Oct 23, 2013
•
209 views
Icom IC706mk2g Transceiver does not transmit in SSB (Single Side Band) (USB & LSB)
First, make sure that the microphone is properly connected to the transceiver. Check all the connections and ensure that there are no loose cables.
Next, check the settings on the transceiver to make sure that it is set to SSB mode. Sometimes, the mode settings can get changed accidentally, so it's important to double-check.
If the issue still persists, try resetting the transceiver to its factory settings. This can sometimes resolve any software glitches that may be causing the problem.
If none of these steps work, it's possible that there may be a hardware issue with the transceiver. In that case, it's best to contact a professional technician for further assistance.
3/28/2024 10:24:30 AM •
Radio...
•
Answered
9 hours ago
•
24 views
Serial Number for KPG-790
All questions need FULL 'make model (what it is) first 3 words please.
Something to do with this? The serial number should on the label on the rear by the mains cable. This is a statutory requirement unless someone removed it to hide its identity.
https://www.google.com/search?q=KPG-790
..
2/15/2024 3:06:45 AM •
Radio...
•
Answered
on Feb 15, 2024
•
27 views
Not finding what you are looking for?