20 Most Recent HP DesignJet 330 InkJet Printer - Page 8 Questions & Answers

Unplug machine for awhile then plugback. It may reboot..remember its a computer n needs dailyrest. Also any connecting plugs on machine shud b done the same....debris gits on the pins causin bad contact. Make sure fan is workn rite

https://h30434.www3.hp.com/t5/DesignJet-Large-Format-Printers-Digital-Press/Service-Menu-Access-Code-T2530/td-p/8400053 Service Manual https://www.google.com/search?q=HP+Design+Jet+T2530+Service+Manual ..

You have to replace the formatter. These can be found on ebay used for around $30

Likely one of these components has sustained some damage from the impact. The heating element inside the fuser assembly is porcelain and will crack easily. Cooling fan is stuck from damaged or misaligned fin, or the laser scanner assembly isn't spinning up properly. Any of these components can fail and the printer still seems like it's about to print but stops.

ck some of these... https://duckduckgo.com/?t=ffab&q=disable+the+adf++hp+color+laserjet+4730&atb=v159-1&ia=web Best to you.

Without a screen you can't reset it. Sorry

It sounds like you are experiencing a hardware issue with your HP OfficeJet Pro 8600 printer, specifically with the printhead. Here are some troubleshooting steps you can try:

1. Power cycle the printer: Turn off the printer, unplug it from the power source, and wait for about 1 minute. Plug the printer back in and turn it on. This may help to reset the printer and clear any errors.
2. Remove the printhead and cartridges: Turn off the printer, open the front cover, and remove the printhead and all the cartridges. Clean the printhead with a lint-free cloth and distilled water. Be sure to let the printhead dry completely before reinserting it. Reinstall the printhead and cartridges and turn the printer back on.
3. Reset the printer: Follow the steps for a full reset from the service menu, but before turning the printer back on, disconnect the printer from any network or computer connections. Turn the printer back on and try to print a test page.
4. Replace the printhead: If the issue persists, it may be necessary to replace the printhead. Contact HP support for further assistance and information on how to order a replacement printhead.

Note: Using refillable cartridges can sometimes cause issues with the printer and may void the warranty. It is recommended to use genuine HP cartridges to ensure the best performance and reliability of your printer.

HP Printer users faced trouble when they setup HP Printer with the computer. Follow the steps to setup your HP 3830 desk jet printer. Step1: Unpack your printer and connect to power Step2: HP Easy Start Printer Setup Software Step3: After printer setup, add this printer to your HP Support Dashboard

Hi! Error 60.03 on the HP LaserJet Pro M402n indicates a tray 2 lift error. Here are the steps you can take to fix the issue:

1. Turn off the printer and unplug it from the power source.
2. Remove the paper tray 2 from the printer.
3. Check the tray for any damaged or jammed paper. If you find any, remove it carefully.
4. Check the tray for any broken parts or debris that may be blocking the tray's movement. Clean the tray and remove any debris if you find any.
5. Reinsert the tray into the printer and make sure it is correctly aligned.
6. Turn on the printer and check if the error has been resolved.

If the error persists, you may need to replace the paper pickup and feed rollers in tray 2. If you are not comfortable doing this yourself, it is recommended that you contact an authorized HP service technician to help you resolve the issue. Regards Viktor

Question edited for clarity. 3 Questions made into one question, 2 duplicates deleted. Refresh page to see your question. Please don't type in all CAPS, it is considered SHOUTING and harder to read. There are three different colour of lights. All explained here.

blinking information red light - HP Support Community

hp.com https://h30434.www3.hp.com > td-p Jun 29, 2020 - 1) Take out the cartridges. 2) Unplug the power cord from the printer & wall. 3) Wait for 30 seconds. 4) Plug the power cord back into ... Missing: 890c ‎' Must include: 890c

• HP Deskjet Printers - Blinking Lights ' HP® Customer Support

  https://support.hp.com > ca-en > document Follow these steps to reset the power module. Disconnect the power cord from the rear of the printer. Unplug the power cord from the electrical outlet. Unplug ...

• Blinking Lights on the HP Deskjet 900 Printer Series

  https://support.hp.com > us-en > document > bud09170 These lights can be on, off, or blinking (flashing), depending on the status of the product. Blinking lights can indicate error conditions.

First, make sure the printer is connected to a power source and the power is turned on. If it is, try disconnecting the power cord from the printer and wait a few seconds before reconnecting it. Also make sure the power cord is connected to a working outlet. If these steps do not help, your printer may require additional maintenance or repairs. I recommend contacting HP Support for assistance.

f the scanner on your HP OfficeJet Pro 7720 is not returning to the home position when making a copy from the original glass, there may be an issue with the scanner mechanism or the position sensor. Here are a few things you can try to troubleshoot the problem:

1. Perform a power reset: Turn off the printer, unplug the power cord, wait for a minute or two, then plug it back in and turn the printer back on. This may help reset the scanner mechanism.
2. Clean the scanner glass: If the scanner glass is dirty or has smudges, it may cause the scanner to slip. Clean the glass with a soft, lint-free cloth and a non-abrasive glass cleaner.
3. Check for obstructions: Make sure there are no obstructions, such as paper clips or debris, preventing the scanner from moving freely.
4. Reset the printer to default settings: In the printer's settings menu, reset the printer to its default settings. This may help resolve any software issues that could be causing the problem.
5. Update the printer's firmware: Make sure the printer's firmware is up to date by visiting the HP support website and downloading the latest firmware.

If none of the above steps resolve the issue, there may be a hardware problem with the scanner mechanism or position sensor. In this case, it is recommended to contact HP support or a professional printer technician for further assistance.

First, try to clean the print head by following the steps below: 1. Remove the old ink cartridges and clean the print head nozzle with a damp cotton swab to remove any dried ink. 2. Reinstall the new ink cartridges and print a test page. 3. If the test page is still blurry, try running the printer's alignment utility. This is typically accessed through the printer's settings or system preferences. 4. If the alignment utility doesn't help, try manually doing an alignment page directly from your computer. Be sure to follow the instructions from the printer manual or from the printer manufacturer's website. 5. If the alignment page is still blurry, try reinstalling the cartridges to ensure the cartridges are securely in place. 6. If all else fails, you may need to replace the ink cartridges