20 Most Recent HP LaserJet 3055 All-In-One Printer - Page 6 Questions & Answers

49 error means firmware error..solution: 1. Press CANCEL JOB to clear the print job from the printer memory. 2. Turn the printer off, and then turn the printer on. You can try reprinting the job to see if it was a temporary error. 3. If error persists, try printing a job from a different software application. If the alternate job prints, go back to the first application and try printing a different file. (If the message only appears with a certain software application or certain print job, try upgrading the printer driver and / or firmware.) 4. If the message persists with different software applications and print jobs, disconnect all cables to the printer that connect it to the network or printer. Turn the printer off and delete the print queue. Then reboot printer AND computer, reconnect cables, and try printing again. 5. Remove all EIO devices from the printer (Jet Direct cards, hard drives, etc.). If 49 errors goes away, turn printer off, re-install EIO devices one at a time, and reboot printer each time to determine which EIO device is failing. 6. If printing still fails with all EIO devices removed, remove all memory DIMMs or third-party DIMMs from the printer. (Do not remove the firmware DIMM-- printer won't function without this installed.) Turn the printer on with DIMMS missing. If the error no longer exists, install each DIMM one at a time, turn printer on, test printer. Replace a DIMM if you determine that it causes the error. 7. Remember to reconnect all cables that connect the printer to the network or computer. 8. If the error persists, replace the firmware DIMM. 9. If error persists, replace the formatter. If you need any kind of technical assistance you can contact support cell at http://www.vtechsquad.com/

You have to install a printer driver that is for your printer. There is no universal printer driver. You can download the HP printer drivers from their support WEB site. Please click on this link and select your model printer to download :- http://welcome.hp.com/country/us/en/support.html

You can go to the manufacturer website then download the software from website as per the model number.Then install it....:)) If you need any technical help on printer then you can reach at http://www.vtechsquad.com/

Have you tried cleaning the printer head unit?Try to check if you have properly installed the ink cartridge.Reinstall your printer,You might have a problem with your printer fuser.Your last option would be replacing your printer fuser.

#Remove back metal door, clean sensors as shown in figure, check sensor flags & spring..

make sure the power is completely hooked up and if so there may be some damage to the inside of the printer.

USB: Run the cd, when its asked for connecting connect the usb cable, do rest..Network. Menu>network setup>TCP/IP>enter IP address>save it.connect network patch cable, take configuration page through printer menu settings, verify the IP address save or not> go to system 1. Run the CD select network as network printer> system will detect the printer go for rest of the process.. 2. Through system> start> settings>printers& faxes>add printer wizard > select as local printer> select create new port in dialog box> select TCP/IP> type configured IPadress> do rest of the run process..

Description:Technically repeat image is known as "Ghost Image":Easy method to fin out which part is faulty:Count how many repeat images on paper..1.If its below five times: Replace cartridge.. 2.If its above five times replace "Teflon sleeve" or replace "Fuser assembly".( only service personnel can perform this activity)

When powered on printer 3055 it gives error on control panel that
"Scanner error 6 Trun off and then on "
after several restart printer gives the same error
what will be the problem

Probably the network cable is broken, confirm the cable is ok, then you can as well change the network port on the printer.

check in heater section or temperature sensor device have some problem find and replace it