D-Link DSC-350 Digital Camera - Answered Questions & Fixed issues

Access the manufacturer's web-site: ftp://ftp2.dlink.com/PRODUCTS/DSC-350/REVA/ and download the software.

http://www.downloadplex.com/Drivers/Other-Devices/Others/d-link-dsc-350f-driver-180h_102473.html

Hi,
Please the driver here : www.tomshardware.com > Forum > Windows 7 > Drivers
www.sevenforums.com > ... > Drivers
www.soft32.com/.../Windows/Drivers/2-52.html
www.usbman.com/news/3comhomeconnectdrivers.htm
Regards, Jay__uyhrtg645

i cant use dsc 350f as a webcam please help me thanks alot

Forget the cable. Buy an inexpensive card reader to download your pictures to a folder you create on your desktop.

http://nodevice.in/driver/DSC-350/get21634.html

how can i get it . solve my problem

Have you installed the drivers? If not, install the drivers on your computer from the supplied CD ROM. After that, the PC will recognize the camera.

when I press click button giving only beep sound but not flash.
So Please give me solution. Urgent.

visit dlink.com select the product and just download the drivers there.

good luck

smeags

The camera should be supported on Vista, you find driver here External Mirror 1

You find driver here External Mirror 1

SOFTWARE CD IS SCRACH

is this a sony? try to go on the web site and download a version for vista

here's the steps i'd follow.

1. check battery to make sure you have a fully charged battery
2 plug the usb cable to the camera and the pc with the battery in it to see if it works and that it is not a power problem.
3. use a different sd card
4. read the manual to locate the hard reset problem as it may be a firmware problem

if you have done all of this and it still doesn't turn on chances are its faulty so call tech support.

smeags

You can find the details of the operator and the state they belong to .the operators wont reveal the address and name of any mobile numbers only higher officials can only get those information.
In order to trace the operator name and state you can try this link
http://www.indiatrace.com/trace-mobile-number-location/trace-mobile-number.php

I hope this will help you if it does do rate the answer
Thank you
regards
lalith

I am sure it is now toast and you cannot downgrade if the wrong firmware has been installed. I would ask D-Link.

https://www.youtube.com/watch?v=zKeXtyUMKjA Check out this video it might help you with your issue.

Please open router page and go to advanced just like in this emulator. http://support.dlink.com/emulators/wbr2310/adv_network.htm

try changing the channel number from auto to a channel number 2 or 3 higher than the lowest channel number.' do this by logging into the d-link dsl 2640