20 Most Recent Cobra 22 CHANNEL 2-WAY RADIOS - Page 6 Questions & Answers

It is a radar detector, not a radio. You are in the wrong area. I honestly cannot figure out why a radar detector would ever need to be reset. The Cobra website does ot have your manual. Try the SPX6700 https://cdn.shopify.com/s/files/1/2203/2035/files/SPX6700_MANL_vG.pdf?3315915327722024405

This may be a power protection diode which will be next to the power plug inside the radio. When they are overloaded or cross polarised they can blow, hopefully in time to protect the rest of the circuits. A video describing the issue and what to look for -

do you have the volume cranked at 1/4 ,1/2,or 3/4 full volume ? it should be between 1/4 and 3/8 not quite 1/2 volume . There is also not much going on lately so some one you think is close and usually slams your receive , may be further away . The only way to check this is to get a service manual and check out the alignment .

first you need the radio. second you need rg58coax and an antenna third you need a vehicle to put the antenna on You should get a cigarette lighter power plug to run electricity to the radio. fourth, you should figure a spot to mount it in your vehicle thats out of the drivers way yet able to change channels on it without stretching . You may need an swr meter to check your antenna match before you talk on it. Get a friend that knows how to do this for you .

Am power VR6 ssb power VR7 Modulation cut r-104

needs to be retuned

take it to a cb shop near you . See what they can do to fix it. If you fix it then he will charge you double for fixing what you fixed and fixing it correctly .

40 LSB 40 AM 40 USB total 120 channels.

good luck

cash

what you do is look at your meter,then key the and say something . Turn the variable all the to the left ,look at the meter and say something . Now turn the variable all the way to the right and say something . which ever way is best leave it on that setting .

Make sure the antenna has a good gound at its base and make sure nothing is touching the whip or the coil and make sure the coil is not too close to anything metal.

Tengo un Motorola cuya bater?a ce0168 se baja en par de horas , hay bater?a de respaldo.