Top 20 Sony HVR-A1E HDV Digital Camcorder Questions & Answers

This video goes over the problem you are having.

hi, yes it has, go in camera settings but if advise you, better not to use it because too much pixelizing with deep zooms (that's why it is desactivated from the beginig)

I am one of the lead technicians at VideoOneRepair.com. We are a repair shop that specializes in only Sony and Canon Prosumer camcorders. The problem that you are experiencing with your Sony HVR-A1U camcorder is a common problem with this model camcorder. The ribbon cable that connects the LCD screen to the main part of the camcorder goes faulty and needs to be replaced. Sony also recommends that when this cable is replaced you must also replace a modified part to prevent this from happening again. The estimate to replace both of these parts is $360.19 parts and labor. This also includes cleaning and servicing. We also offer a 6 month guarantee on the entire camcorder, not just what it was sent in for. The estimate and the return shipping are free even if you do not have the camcorder repaired. Please feel free to call, email or post any questions you have and I would be happy to respond.

I am one of the lead technicians at VideoOneRepair.com toll free 888 283 2228. We are a repair shop that specializes in only Sony and Canon Prosumer camcorders. The problem that you are experiencing with your Sony HVR-A1U camcorder is a common problem with this model camcorder. The ribbon cable that connects the LCD screen to the main part of the camcorder goes faulty and needs to be replaced. Sony also recommends that when this cable is replaced you must also replace a modified part to prevent this from happening again. The estimate to replace both of these parts is $360.19 parts and labor. This also includes cleaning and servicing. We also offer a 6 month guarantee on the entire camcorder, not just what it was sent in for. The estimate and the return shipping are free even if you do not have the camcorder repaired. Please feel free to call, email or post any questions you have and I would be happy to respond.

The most likely cause for this is a zoom or focus lens out of place or impaired in some way. This will require disassembling the camera to remove the lens assembly and then disassembling the lens block to repair. This can be done fairly inexpensively but it's not really a user serviceable problem and should be repaired by a qualified service technician.

My name is Rick and I'm a professional repair technician with over 20 years in the business and have repaired many of these. I'm semi retired and work from home with little overhead so I can keep repair costs low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.

If this response has been of any help to you, please be sure and give a positive vote for me on FixYa.com.

The most likely cause for this is a damaged or defective flexible ribbon cable that connects the LCD to the camera body and will require disassembling the camera and LCD assembly to remove and replace the flex cable. This can be done fairly inexpensively. However, it's not really a user serviceable problem and should be repaired by a qualified service technician.

My name is Rick and I'm a professional repair technician with over 20 years in the business and have repaired many of these. I'm semi retired and work from home with little overhead so I can keep repair costs low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.

If this response has been of any help to you, please be sure and give a positive vote for me on FixYa.com.

Dear
need not try any tips, as its the problem of mechanical deck, which is giving this problem it needs to get replaced, as the cable on the back of hvr-a1, mecha deck gets broken....
due tow hich the error starts coming...
get that replaced

Dirty heads may cause TimeCode breaks. Try a clean.
The fast start feature of this camera can also cause problems during recording.

Dear
your camers touch screen needs to get replaced by a service centre on an expert engineer.

It sounds like you are using an aftermarket (non-sony) battery pack. The camcorder you are using probably requires the Genuine Sony 'Infolithium' Battery pack (usually in the box of the camera). If you are getting this message with the proper battery installed, i would contact SONY

no ,but you will have a dvd quality picture. HD means
the picture size format usely 16:9, HDMI its a Hd
multimedia interface its HD quality to...
hope that help you..

dear ... there is an option in the menu .....
of hvr A1 TO KEEP THE VIEW finder.... ON..

write nw
ur camcorder is in auto mode ,wht happen in auto mode is ,view finder gets ON only when u turn the LCD pannel ...
so need nt worry change ur MENU option OF view finder from AUTO to ON,......

Camera gives Moisture error sign if it really have moisture condensation inside or its moisture sensor itself got defective.

if moisture is inside, blow hot air in camera mechanism for 5-6 minutes by hair dryer (not so closed with mechanism) and check / test.

If problem still exist it means moisture sensor is defective and i know its Sony high-end model camera and know how to fix it yet I would recommend to take camera to Sony Service center for proper repair.

First and foremost shut down the device. Remove the battery if possible for 1 minute. Then restart/power up device. If still no luck or response. Go into the setting and look for the reset to default setting if there is no option for touch screen controls. Best of luck

This machine dates back to 2007. I suspect most of the organic electrolytic capacitors are either leaky or short circuit and there are many. A Sony Service Centre may be able to repair it for you.

That means the mechanism is either jammed or there is no control. Due to its age it may be a problem to get it going again due to leaking capacitors from lack of use or age.

Question edited for clarity and toss in CAPS. A professional camera especially a Sony, should be professionally repaired IMHO. https://www.google.com/search?q=sony+dsr+pd170+blank+screen+problem+solution

The heads in your cassette might either be misaligned or dirty or need to be replaced.

It sounds like your Sony DCR-DVD108 camcorder may have a problem with the battery or the power connection. For the battery issue, you can try replacing the battery with a new one that is compatible with your camcorder. The Sony NP-FP50 or NP-FP70 are compatible batteries for your DCR-DVD108. You can purchase them online or from a camera store. As for the "Movie Disabled" message, it may be caused by the type of disc you are using. The Sony DCR-DVD108 camcorder is compatible with DVD-R and DVD-RW discs, but it may not be compatible with all brands of discs. You may need to try using a different brand of disc to see if that resolves the issue. Additionally, make sure that the camcorder is set to the correct recording mode, such as video mode, and that there is enough space on the disc to record the video. If none of these solutions work, there may be a problem with the camcorder itself, and it may need to be repaired or replaced.