20 Most Recent Sony Handycam DCR-DVD505 DVD Camcorder - Page 8 Questions & Answers

You may download drivers and software here.

Please take the camera to a sony repair centre you might brake something els

Lcd hinch faulty

This machine dates back to 2007. I suspect most of the organic electrolytic capacitors are either leaky or short circuit and there are many. A Sony Service Centre may be able to repair it for you.

An HDD FORMAT ERROR appears on the camera LCD or ...

Sony https://www.sony.com > electronics > support > articles Mar 30, 2021 - This error may occur if data becomes corrupt on the camera hard disk drive. To resolve this issue, it will be necessary to format the hard ...

E 31:00 HDD Format Error

Sony https://us.community.sony.com > question > e-3100-hd... Jun 6, 2013 - Perform a power reset on the camcorder. Turn off the camcorder. Remove the battery and disconnect the AC power adapter for 60 seconds. Insert ... ..

That means the mechanism is either jammed or there is no control. Due to its age it may be a problem to get it going again due to leaking capacitors from lack of use or age.

Question edited for clarity and toss in CAPS. A professional camera especially a Sony, should be professionally repaired IMHO. https://www.google.com/search?q=sony+dsr+pd170+blank+screen+problem+solution

The heads in your cassette might either be misaligned or dirty or need to be replaced.

It needs servicing at a Sony Service Centre. You can't fix electronics and servos at home unless you have equipment. There is a video here, because it in a known issue.

Replacing the flex cable on a camcorder can be a delicate and complex process, as it requires disassembling the device and accessing its internal components. Here are some general steps that you can follow:

1. Turn off the camcorder and remove the battery.
2. Locate the screws or clips that hold the casing of the camcorder in place. Depending on the model, these may be on the bottom, sides, or back of the device.
3. Carefully remove the casing and set it aside.
4. Locate the flex cable that connects the LCD screen to the circuit board. It may be taped or clipped in place.
5. Gently disconnect the flex cable from the circuit board and LCD screen. Take note of how it is connected so that you can reattach the new flex cable correctly.
6. Install the new flex cable in the same position and orientation as the old one.
7. Reconnect the flex cable to the circuit board and LCD screen.
8. Replace the casing of the camcorder and secure it with screws or clips.
9. Reinsert the battery and turn on the camcorder to test the LCD screen.

It's important to note that the specific steps and tools required for this process can vary depending on the make and model of your camcorder. Additionally, if you're not familiar with electronics repair, it's generally recommended to have a professional technician perform the repair to avoid damaging the device or injuring yourself.

It sounds like your Sony DCR-DVD108 camcorder may have a problem with the battery or the power connection. For the battery issue, you can try replacing the battery with a new one that is compatible with your camcorder. The Sony NP-FP50 or NP-FP70 are compatible batteries for your DCR-DVD108. You can purchase them online or from a camera store. As for the "Movie Disabled" message, it may be caused by the type of disc you are using. The Sony DCR-DVD108 camcorder is compatible with DVD-R and DVD-RW discs, but it may not be compatible with all brands of discs. You may need to try using a different brand of disc to see if that resolves the issue. Additionally, make sure that the camcorder is set to the correct recording mode, such as video mode, and that there is enough space on the disc to record the video. If none of these solutions work, there may be a problem with the camcorder itself, and it may need to be repaired or replaced.

Help here. Compare specs, but why not just buy the right one. 420 https://www.google.com/search?q=SONY+CCD+FX420+charger 620 https://www.google.com/search?q=SONY+CCD+FX620+charger ..