Top 20
Maytag SAV5710 Top Load Washer Questions & Answers
My new belt is getting
Hello,
the belt is shredding because it is not seating correctly. This can be a problem from the pulley... If the pulley is not correctly positioned, it will wobble and the belt will begin to touch other parts and it begins to shred.
Have the pulley adjusted and well seated. Make sure the pulley is well screwed or bolted in the correct manner.
Check the pulley as mentioned above because that is where the problem lies....
Regards.
MAYTAG WASHER SAV5710AWW please
Easy job... turn the washer away from the wall and take off the small plate at the back, this is the plate pump is there in corner held in there with 3 3/8 bolts. Remove hoses and remove pump, previouslly you will get some water drain washer
first by gravity.
Remove the clips holding the pump to the motor shaft. Put your bucket under the pump and take the clamps off the hoses. Pull the pump toward you to remove it from the motor shaft.
Additionally, this video could helpful like a reference guide...
Good luck.
I just bought one off a friend because he couldn't
Start by checking the legs at the bottom. If they are auto leveling they should move freely to absorb the vibrations. If it requires you to level them you can do it by turning the clockwise to shorten them and counterclockwise to make them longer.
Top load Maytag A882 will
clean the drain pipe line remove some foreign object inside the line that coz of blocking water going out,if clean but water not going out you need to replace the drain pump of your unit.lay down the unit check the small motor that connecting to drain line remove the screw and remember the exactly position of the parts before removing,after that buy a new one and return properly and carefully.,remind unplug the unit before anything to do.
I have water leaking from
sounds like the water pump, pull the housing and look at the bottom center for a oval shape with two hoses.I bet you find the leak there.......GOOD LUCK
My Maytag, Model A882 series
Good day,
This is usually caused by the dual water valve on the back of the machine failing.
It supplies both cold and hot water to the machine.
In your case, it appears the cold water side of the valve has failed.
It is a none repairable item, and you will need to replace the valve which is available at any decent sized appliance parts house.
However, before replacing the valve, make sure the cold water from the faucet is turned on, and with that hose removed, make sure cold water will come out of the hose if you turn the cold water valve on.
How to repalace belt 2200063?
Page 27 of this manual will explain how to remove the motor and pump,then dis-assemble them to replace the belt.
Please double check the procedure before re-installing the pump and motor.
http://www.servicematters.com/maytag_library/docs/16022937.pdf
My 6 yr old Maytag SAV5710AWW recently started
Sounds like you nailed it, the Tub Seal.
It can be a stream or an ocean, either way maytags do leak from that seal pretty often. Removal of the tub is your only option. The price is up to the tech, but this type of repair is considered to be a major fix, and is usually done in a shop.
How do i put the washing machine belt back on?
I am not a repair professional. I am just a 78 year old man who has been making his own repairs for about 50 years. Therefore the washer ID doesn't mean
anything to me. It's hard to understand why the belt came off. Usually when the belt gets loose and starts slipping, the washer won't spin, and that's the problem. Since you know the belt came off, I'll presume you have the back off, if not then you'll have to remove the back. First thing is to pull the electrical plug. Then disconnect the water hoses after turning off the water supply valves. When you disconnect the hoses, they will be full of water, so have a small bucket handy to catch the water. Now take the back off and get down where you can see how the motor is mounted. It is a common thing for the belt to stretch, so they built in provisions to tighten it. There is a locking nut or bolt which holds the belt adjustment. The motor is mounted so that it can be turned to tighten the belt. Put the belt back on the pulleys and turn the motor to tighten the belt. Since your belt came off, which is unusual, take a good look at it before you put it back on. If it is damaged or stretched so far that you can't tighten it, you'll need to replace it. Use a bar, or a long screwdriver or a large crescent wrench to hold the belt tight while you secure the tension lock. I usually need help when I do this. You would be surprised to see all the information available if you google clothes washer repair, I hope this helps you. If it does (or if it doesn't) please rate my help on fixya.
Not finding what you are looking for?