Canon PIXMA MP830 All-In-One InkJet Printer - Answered Questions & Fixed issues

Effective Solutions to Troubleshoot Canon Printer Error Code 6A00: Cartridge faults are not always easy to deal with. Solution 1: Check Print Head Carriage

• Make sure whether the printhead carriage is moving back and forth properly or not.

Solution 2: Check the Purge Unit

• If you have just moved the printhead assembly, the purge unit error will still be there.

Solution 3: Reseat the Ink Pads

• Press down the ink pads down in the purge unit.

To know more: Canon Printer Error Code 6A00

said error 6A00 CODE

Canon PIXMA MP830 all-in-one Inkjet Printer
Error code 5C10 on computor screen and on the printer it says 6A00

Had this same problem and just fixed it. You need to actually change the button settings in Navigator. Open MP navigator and choose One-Click, then click Button Settings. You can choose a new save destination from here. Even though you are using the software instead of the button on the device, it works.

When i am trying to fax a document it is saying that the memory is full. But when i go to the menu and to fax memory it is saying empty. How to solve this problem

Hi . That problem is the print head. Is defective. Buy a continuous ink system printer. Is more efficient

Canon Error Code 6A00Printer Repair

Did it finish maintenance before you reboot?

Either a power supply fault or there is a fault in the main circuit board. You may find a replacement power unit (they are held in by two clips ) at an electronics recycler or auction site like e-bay, but the main board is not an available part.

hi Jackelle21. i have had a look around the internet and all i can find out from going into forums is that the problem might be because you need to download what they are calling (mp navigator) so not sure if this is what you have to do.but if you go to this link you will see download sites to where you can get it. mp navigator download Google Search or this one. Canon MP Navigator EX

The most common cause of this is a failure in one of four earth circuit in the print head. It is not repairable

hi deborah. see if this link helps you find out why it will not turn on. Mp 380 printer will not turn on Google Search

Look through your fax machine instructions,. There should be some there regarding how many rings before pickup. Or maybe the unit does not have that feature and is designed to have its own separate line for faxes.

Call Canon! Page 30 of your manual, http://gdlp01.c-wss.com/gds/5/0300001375/01/iP4600_GS_EN-US_V1.pdf Also r4ad this apple thread: https://discussions.apple.com/thread/7560698?start=0&tstart=0

Did you let the camera format the sd card before you took your pictures? Have you tried another sd card? Its possible the pc did not close the card properly so the printer does not see it. I would try another card before going any further. Make sure your setting on the printer is set to read only (in "Other" settings) if at read/write you will not be able to print.

Uninstall the printer driver completely, then reinstall the driver again.

Hi. Have you try sending fax to other number maybe the problem is the receiver in the other side of the line .

You can sometimes buy cleaning cartridges that contain fluid designed to clean nozzles. See if they exist for your model.

Check for the switch is it not jermed or check the switch contact is it not normally opened or normally closed for the full time.

With the machine powered on, open the top cover (including the scanner unit). The cartridge carriage and printhead will move to the center. locate the cartridge needing to be replaced (flashing light or light off) push the clip at the front top corner forward and the cartridge will pop up slightly. Remove and replace. To replace a cartridge remove any nozzle clips and the airway seal tape. Slide the new cartridge into the appropriate slot angling slightly down the in. press down until it clicks in place. If it feels difficult , try again - don't force it. When done, close the cover down and your machine should do a self clean and go.