20 Most Recent Canon PIXMA MP830 All-In-One InkJet Printer - Page 6 Questions & Answers

0helpful
4answers

Error code 6500

The 6500 error code is a logic board error code. The PCI Bus error is detected by the ASCI. Sounds like it needs new logic board.
10/21/2013 1:32:05 PM • Canon PIXMA... • Answered on Oct 21, 2013
0helpful
3answers

MP830 Cyan Ink won't print

I have fixed the problem with my MP830 not printing black. It was the print head. I took the print head out and noticed that the black was clogged.

Apparently as the print head uses such fine jets to get the quality levels up, it seems to be quite common for the print head to become clogged.

There are many ways of unclogging the print head, allot of people I read about used alcohol type liquids to clean with, but I was able to get mine unclogged using warm water, a syringe and some good quality paper towel.

Its a tedious process, but you have to unclog all the dried out ink out of the print head. Some people suggested soaking the print head over-night in water or alcohol, but I was too impatient for this method.

There are two small screws which I undid, this allows the print head to come apart and give you better access to clean. using warm water in a syringe(large needle and body-the type used for re-filling cartridges) squirt water into the offending color hole. you should be able to see all the dried ink comming out.

The paper towel is used to bleed the water and ink through the printhead slots.

If anyone is interested in the method which worked for me, feel free to drop me an email and I can offer some more details, maybe would be easier with a few pics too.

I am outta time, kind of hard to explain in a few paragraphs.

My printer was 2 weeks out of warranty when I did this, there was no way I was going to pay a cent more for a new print head thats for sure.

Use this method at your own risk.

10/19/2013 10:24:08 PM • Canon PIXMA... • Answered on Oct 19, 2013
0helpful
4answers

Receiving incoming faxes

# Press the button to enter Fax mode. # Press . # Press the right or left arrow button to select [Receive mode settings], then press the button. # Press the up or down arrow to select the receive mode that best suits your needs(you probably want "FAX ONLY" When you want to receive only faxes automatically with your machine, or have a dedicated telephone line for FAX use only), then press . # Press repeatedly to return to fax standby mode.
9/11/2013 8:46:12 AM • Canon PIXMA... • Answered on Sep 11, 2013
0helpful
1answer

I have just replaced all the cartridges and can no

hello there, did u try to print some test pages? and did changed printer configuration that u changed the cartridges?
9/3/2013 10:50:39 AM • Canon PIXMA... • Answered on Sep 03, 2013
0helpful
1answer

Fax Mode "Status:Standby"

go to the fax option from the menu and check the status option .

The setting had been changed to standby ib your fax machine

8/20/2013 2:38:04 AM • Canon PIXMA... • Answered on Aug 20, 2013
0helpful
1answer

The scanner on my Canon MP830 has stopped working

because of thick book scanner glass can go down and rubing on the mechanism of sliding assembly of scanner may be there is some problem try to recover it
8/14/2013 8:27:03 PM • Canon PIXMA... • Answered on Aug 14, 2013
0helpful
1answer

Have canon mp830 printer cleaned printer head. Now

Windows 7 Offline Privacy Statement for the Microsoft Error Reporting ServiceFor the most up-to-date privacy information, see the online Windows 7 Privacy Statement at:http://go.microsoft.com/fwlink/?LinkId=104288WHAT THIS FEATURE DOESThe Microsoft Error Reporting Service helps Microsoft and Microsoft partners diagnose problems in the software you use and provide solutions. Not all problems have solutions, but when solutions are available, they are offered as steps to solve a problem you've reported or as updates to install. To help prevent problems and make software more reliable, some solutions are also included in service packs and future versions of the software.The Microsoft Error Reporting Service also provides Setup Repair, an error reporting service that may run during Windows setup if a problem occurs.INFORMATION COLLECTED, PROCESSED, OR TRANSMITTEDMany Microsoft software programs, including Windows 7, are designed to work with the reporting service. If a problem occurs in one of these software programs, you might be asked if you want to report it. If you host virtual machines using a Windows operating system, reports generated by the Windows operating system for the Microsoft Error Reporting Service might include information about virtual machines. The reporting service collects information that is useful for diagnosing and solving the problem that has occurred, such as: * Where the problem happened in the software or hardware * The type or severity of the problem * Files that help describe the problem * Basic software and hardware information * Possible software performance and compatibility problems These reports might unintentionally contain personal information. For example, a report that contains a snapshot of computer memory might include your name, part of a document you were working on, or data that you recently submitted to a website. If a report is likely to contain this type of information, Windows will ask if you want to send this information, even if you have enabled automatic reporting through the "Recommended settings" option in setup, or Control Panel. This gives you the opportunity to review the report before sending it to Microsoft. Reports including files and data might be stored on your computer until you have an opportunity to review and send them, or after they have been sent.If an error report contains personal information, Microsoft does not use the information to identify you or contact you. In addition, if you enable automatic reporting through the "Recommended settings" option in setup, or in Control Panel, the reporting service will send basic information about where problems occur automatically, but these reports will not have the detail described above.After you send a report, the reporting service might ask you for more information about the error you experienced. If you choose to provide your phone number or e-mail address in this information, your error report will be personally identifiable. Microsoft might contact you to request additional information to help solve the problem you reported.The Microsoft Error Reporting Service generates a globally unique identifier (GUID) that is stored on your computer and sent with error reports to uniquely identify your computer. The GUID is a randomly generated number; it does not contain any personal information and is not used to identify you. We use the GUID to distinguish how widespread the feedback we receive is and how to prioritize it. For example, the GUID allows Microsoft to distinguish between one customer experiencing a problem one hundred times and one hundred customers experiencing the same problem once.USE OF INFORMATIONMicrosoft uses information about errors and problems to improve Microsoft products and services as well as third-party software and hardware designed for use with these products and services. Microsoft employees, contractors, vendors, and partners might be provided access to information collected by the reporting services. However, they will use the information only to repair or improve Microsoft products and services and third-party software and hardware designed for use with Microsoft products and services.Microsoft might share aggregate information about errors and problems. Microsoft uses aggregate information for statistical analysis. Aggregate information does not contain specific information from individual reports, nor does it include any personal or confidential information that might have been collected from a report.Except as described in this statement, personal information you provide will not be transferred to third parties without your consent. We occasionally hire other companies to provide limited services on our behalf, such as performing statistical analysis. We will only provide those companies the personal information they need to deliver the service, and they are prohibited from using that information for any other purpose.Microsoft may access or disclose information about you, including the content of your communications, in order to: (a) comply with the law or respond to lawful requests or legal process; (b) protect the rights or property of Microsoft or our customers, including the enforcement of our agreements or policies governing your use of the software; or (c) act on a good faith belief that such access or disclosure is necessary to protect the personal safety of Microsoft employees, customers, or the public.Information collected by or sent to Microsoft by Windows 7 may be stored and processed in the United States or any other country in which Microsoft or its affiliates, subsidiaries, or service providers maintain facilities. Microsoft abides by the safe harbor framework as set forth by the U.S. Department of Commerce regarding the collection, use, and retention of data from the European Union. CHOICE AND CONTROLIf you choose the recommended settings during Windows 7 setup, basic information about errors will be sent automatically to Microsoft. If a more detailed error report is required, you will be prompted to review it before it is sent. You can change this setting at any time by going to Action Center in Control Panel.SECURITY PRACTICESMicrosoft is committed to helping protect the security of your information. We use a variety of security technologies and procedures to help protect your information from unauthorized access, use, or disclosure. For example, we store the information you provide on computer systems with limited access, which are located in controlled facilities.FOR MORE INFORMATIONIf you have questions about this privacy statement, please contact us by submitting your questions online to Privacy Feedback at:http://go.microsoft.com/?LinkID=9634754Windows 7 Offline Privacy Statement for the Microsoft Error Reporting Servicec/o Microsoft Privacy Response CenterMicrosoft CorporationOne Microsoft WayRedmond, Washington 98052 USA
7/30/2013 8:22:08 PM • Canon PIXMA... • Answered on Jul 30, 2013
0helpful
2answers

Nozzle Still Clogged After Following Maintenance Procedures

just wipe the nozzles or the printhead .on a wet cloth...using DI(deionize water) to remove the clogs that cover nozzles...and then deep clean the printhead using the printer panel features...

good luck..


6/30/2013 9:28:26 PM • Canon PIXMA... • Answered on Jun 30, 2013
0helpful
2answers

Document in ADF error, however there are no

I'm having the very same problem. No paper was ever stuck and the first time I tried to scan a document by laying it on the glass, not even through the feeder and it did this, and just like with you now it won't even print. Apparently this happens a Lot. I sure wish I would have seen these issues before I bought it! I wish I could help you out, but at least you know you're not alone.
6/20/2013 2:57:22 PM • Canon PIXMA... • Answered on Jun 20, 2013
0helpful
1answer

Scanning and faxing

clean the glass with soft cloth and smallest amount of water, rub hard to get off the small dots that cause the lines even if you can not see any
5/22/2013 10:31:29 PM • Canon PIXMA... • Answered on May 22, 2013
0helpful
2answers

Scanner does not work. Cannon MP830.

have you install drivers...

if yes their should not be any problem....o r else just open my computer their shoud be an icon for scan available just put hard copy into scanner and then double click to scan...a small window will pop up showing progress of scan
5/22/2013 9:54:02 AM • Canon PIXMA... • Answered on May 22, 2013
0helpful
2answers

The scanner on my Canon

Hello

Follow the below steps in order to clear the error:

1.With printer OFF press and hold resume
2.while holding it down push and hold Power button
3.Release resume whilst still holding down power, the light should be green (not flashing)
4.Push resume once (orange) twice (Green)and a third time (orange)
5.release power button.
6.Then power it off and on again after it's finished making any noises and settled down.

If the above doesn't solve the problem, then you can reset the printer by following the below steps:


1, Power off the printer
2, Unplug the printer's power cord, wait 5 seconds then replug
the power cord in.
3, Hold the Power button for 6 Beeps
4, Release the Power Button

This will reset the printer and should resolve error problem.

Good luck.
5/21/2013 12:48:20 PM • Canon PIXMA... • Answered on May 21, 2013
0helpful
2answers

Error:u043

1st step: Press and hold the Stop/reset button for 5-10 sec then release. I
f ot working then use a Qtip and moisture (not wet) it with water. Cleans the chip gently and re-insert it back and redo the 1st step.

It work for me everytime!
4/25/2013 11:24:06 AM • Canon PIXMA... • Answered on Apr 25, 2013
0helpful
1answer

Error inner cover open I have checked it many times and appears to be closed. what is wrong???

Check the cover sensor actuator.
4/20/2013 1:08:21 PM • Canon PIXMA... • Answered on Apr 20, 2013
Not finding what you are looking for?
Canon PIXMA MP830 All-In-One InkJet Printer Logo

1,992 questions posted

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

old marine
old marine

Level 3 Expert

2426 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

PIXMA Canon

  • PIXMA Canon

Most Popular Question

get canon pixma mp830 printer print

  • Office Equipment & Supplies
Loading...