20 Most Recent
IBM ThinkPad T42 Notebook - Page 3 Questions & Answers
Who to connect wifi
SETTING UP A BROADBAND CONNECTION First you need to decide what type of broadband and Internet service you require and these are - 1. DSL that uses your existing telephone line. 2. Cable that uses a cable service and can include a cable TV service. 3. A wireless 3G network uses the mobile/cell phone network and can be separate or combine with your cell phone account. This type of Internet connection uses an USB wireless device shaped like an USB memory stick. Note - Combined services generally offer discount pricing and may include a modem/wireless router. If you use a wireless router with the DSL or Cable Internet service then your laptop with a wireless card can then connect to the Internet. You can also connect to a free WiFi hot spots like McDonalds, Star Bucks, the Airport etc. using the wireless card in your laptop. If you use the wireless 3G wireless broadband service, then you can access the Internet anywhere where your ISP has 3G wireless coverage. You need to check the service coverage area where you need Internet service. Once you decide what type of broadband your require, then you need to check with the various Internet Service providers to see if they can offer and the cost of the various plans. Note the download limits and the associated additional costs if you exceed the monthly download limits. Once you sign up with a Internet Service provider, their documentation will include setting up instructions and/or installation CD.
Refurbished product key does not work
The refurb key that they supplied must have been a error, I suggest you contact them to get the correct information because you cannot bypass the product key number to get into windows.
How do you restore my computer back to its original settings
Restart your computer now as soon as you hit the power button keep on holding Alt key & keep on tapping F10 key Alt+F10 it will open the recovery console select full factory restore and follow on screen instruction
this may vary depending on your computer and operating system
(Note:this will erase all datas on the computer)
or you might try
Restart your computer during the boot process you will see on the screen to press a certain key to enter setup
Press and hold that key during the boot up process to enter BIOS using the arrow keys you can load failsafe defaults or load optimized defaults ,press escape then press f10 to save to cmos to restart You will also need to set the time and date
hope it helps
How to delete sign in password?
You can remove or change the Window's User oradministrator's password. You need access to a computer with Internet access todownload the Hiren's Boot CD and burn it onto a CD.Then insert this CD into the laptop/computer and boot upthe laptop/computer with the Hiren's CD and follow the instructions.There are very useful utilities CD and it a Linux boot CDwhich contains quite a lot of Utility programs including a password removalprogram.Click on one of these links todownload HIREN'S BOOTCD :-
http://www.hirensbootcd.net/http://67.20.82.163/
Not booting up
First - re-seat the harddisk and reboot the computer. If the computer does not boot up then reboot andgo into the BIOS configuration to see if the BIOS detects the hard drive. If itdoesn't detect the hard drive then it could be faulty.Then the hard drive needsto be replaced in the computer/laptop, Windows installed and the computer orlaptop's device drivers plus your programs etc. to get a functioningcomputer/laptop again.
Fan replacement
It could just be stuck with the heatsink past underneath the assembly.It sits on top of the processor and they can stick quite tight.Try and ease/slide it left and right a few times rather than pull it straight off.A shorter one probably wont do the job as well as the larger one. The size of heatsink required to remove the heat correctly is caluclated during the design.
Not finding what you are looking for?