20 Most Recent Maytag 24 in. MDB5600A Jetclean II Built-in Dishwasher - Page 4 Questions & Answers

0helpful
3answers

Mouse inside dishwasher

I have an MDBH945AWW.
I FIXED IT! They are getting in thru the water inlet/vent in the lower bottom left of the dishwasher. Here's how we fixed it:
1. Turn off water to machine if possible. Open the door, remove screws on side and top that hold dishwasher in place. Pull the dishwasher out from under the counter. Remove racks from inside.
2. Remove the sound insulation blanket. Mine was a mouse nest so I threw the thing out. Not going to replace it as the noise increase is minimal.
3. On the left side of the tub outside there is a tube that comes from under and is hooked to a small plastic box with an open top. THIS is the point of entry!
4. Poke a long screwdriver or something down into the box and pop the plastic tension prongs free. Reach into the dishwasher and remove the circular plastic grill.
5. Twist the plastic box to the right or left until the tabs line up and it will pop out of the side of the tub. Remove the tube from the box. The box should now be free.
6. Cut a square of 1/4 hardware mesh cloth (flexible metal grid) and cut a hole to fit over the nipple for the tube. Put mesh over the top of the box, secure in place with really heavy duty tape. Something strong like Gorilla Tape or even metal tape for ducts.... conventional duct tape will not hold after a year or so. I taped all around the edges and sealed it down only leaving the top with the mesh exposed.
7. Put the tube back on and then reinstall the box and then the grill.
8. Take this time to SUPER CLEAN the area under and around the dishwasher. Even the outside of the washer. Mice return to the smell of their poop.
9. Put the washer back in and don't forget the screws as well as turning the water back on.

$5 fix or a $500 new machine... you choose!

Oh yeah, and I'm a girl too...
:D
Tracy
2/6/2011 7:48:29 PM • Maytag 24 in.... • Answered on Feb 06, 2011
0helpful
1answer

Leaking

Hi,


Here is a tip that I wrote about dishwashers and them leaking.

Leaking Dishwasher

heatman101


...................

2/4/2011 4:58:26 PM • Maytag 24 in.... • Answered on Feb 04, 2011
0helpful
1answer

Glasses in upper rack not cleaning

Hi


If you are noticing that the dishes are not clean, then there are a few things to check for. Check the soap powder if it's kept in a dry environment. Also try replacing the powder with something like a gel or liquid. Next thing to check for is the water pressure and fill valve. Check if the water is filling in and the spray arms are throwing the water with enough pressure. Try and listen to the sound if you hear a proper spraying action sound. If it seems as a low water pressure then check the fill valve.
Now, check if dishwasher is draining the water or not. While the dishwasher is working check whether the dishwasher is draining and there is not much left out water after the cycle is complete. Dishwasher not draining issue usually occurs due to kinked drain pipe, clogged drain filter or drain pump. Check the drain hose for any visible clogging, remove if present. If no visible lint is present then remove then turn off the dishwasher and remove the drain hose and check for any visible clogging. If still not visible then the drain filter or drain pump is clogged and you'll need to clean the drain filter and drain pump.
1/31/2011 2:43:42 AM • Maytag 24 in.... • Answered on Jan 31, 2011
0helpful
1answer

No water running through the dish washer the

one possibility is the float switch is triggered which is locking up the inlet valve. I am assuming by "no water running through dishwasher" you imply the water is not getting into it during wash cycle.

Refer this circuit diagram to get an idea of how the parts are wired to the control card.

Hope this helps.
1/24/2011 12:51:03 PM • Maytag 24 in.... • Answered on Jan 24, 2011
0helpful
1answer

I have a maytag dishwasher mdb5600awb. it is about

Replace the dock at the back if it is missing a piece. That solved my problem with the top rack not getting clean.
12/29/2010 1:09:05 PM • Maytag 24 in.... • Answered on Dec 29, 2010
0helpful
1answer

After my dishwasher fills with water, and starts

Hello & Welcome to FixYa
If you hear a loud hum/buzz sound from the bottom of the unit then it is the motor that is bad and if the hum comes from the control then it is the timer/electronic control that is bad and needs replacement. However, after reading your question I believe it is the motor that needs replacement. Please get back to me if you have any other questions.

Kevin
12/13/2010 7:25:31 PM • Maytag 24 in.... • Answered on Dec 13, 2010
0helpful
1answer

Does not drain completely

Check your sink air-gap and disposal hose. Over time those can get clogged with food.
Please rate me. Thanks. Have a great day!
12/10/2010 8:00:03 PM • Maytag 24 in.... • Answered on Dec 10, 2010
0helpful
1answer

The dishwasher goes through the cycles but will

Hi When the Dishwasher is not filling in, you'll need to check for the water inlet valve, the filter screen and the float switch/assembly. Also check for the float assembly inside the dishwasher. When water is filling your dishwasher, a float rises along with it. As the float reaches a certain threshold level, it shuts off the flow of water, thereby preventing a leak. Sometimes the float can get stuck in the wrong position in your dishwasher, and it can prevent your dishwasher from filling. Sometimes it can happen due to float valve and on other occasions due to float switch. Inspect the water hose coming to the dishwasher for any blockages. If these are fine then it's due to Water Inlet Valve. Use a multimeter and check for the continuity on inlet valve. If you don't get any value on the multimeter hen you'll need to replace the water inlet valve assembly. Please post back for any further assistance. Daniel
10/20/2010 5:57:45 PM • Maytag 24 in.... • Answered on Oct 20, 2010
0helpful
1answer

My MDB5600AWW isn't cleaning the dishes. Even

Hi,
Check the drain hose... it sounds like it has fallen down too low and is not looped high enough to keep the water in the tub....this will let the water drain right out as it fills like you are saying...


Dishwasher Spray Arms not Spinning

How to Buy Appliance Parts Online

A bad heating element causes many problems in dishwashers...

Dishwasher Problems The Heating Element not Working

Dishwasher Maintenance

heatman101

Asker's Testimonial " explanation very clear. will give it a go and seehowsimple it was. thanks Ronnie " - ronnieshomes
10/13/2010 8:47:27 PM • Maytag 24 in.... • Answered on Oct 13, 2010
0helpful
1answer

Dishes come out with a white cloudy film on them

just call me on +263912639492, thta's easy.thank you.
Dr. Kelson
10/7/2010 1:24:42 AM • Maytag 24 in.... • Answered on Oct 07, 2010
0helpful
1answer

My dishes have become cloudy. My glasses and pans

The problem is hard water. www.dishwasherfilter.com has a product to solve this problem once and for all. It filters the water going into your dishwasher and removes the hard minerals that leave those spots. It is very affordable and even has a money back guarantee. You will love the way your dishes look with this product.

9/30/2010 1:33:37 PM • Maytag 24 in.... • Answered on Sep 30, 2010
0helpful
1answer

The spongee seal at the bottom of the dishwasher

Hi,
Here is a tip that I wrote about dishwashers and them leaking.

Leaking Dishwasher

heatman101

retodfkjhgofd
9/29/2010 8:33:16 PM • Maytag 24 in.... • Answered on Sep 29, 2010
0helpful
1answer

Water keeps running

Hi, That is the opposite of this tip... you have dirt in the fill valve...

Here is a tip that will help you to find out why water will not come into thedishwasher...

Dishwasher Trouble No Water entering Dishwasher

heatman101
9/21/2010 4:10:50 AM • Maytag 24 in.... • Answered on Sep 21, 2010
0helpful
1answer

Code 2 shows up on

There is a technical service sheet behind the toekick panel that will help you.
Copy and paste this factory service manual for further detail.

http://www.servicematters.com/maytag_library/docs/16021814.pdf
9/16/2010 12:40:24 AM • Maytag 24 in.... • Answered on Sep 16, 2010
0helpful
1answer

All the lights are blinking

i have model number mdbd850awb and this exact same thing happened to me on the weekend. i fixed the problem by total chance! I depressed the "off" button for a few seconds and it reset the control panel, now it's working great... i hope this works for you and saves you some time and money!
9/15/2010 8:45:40 PM • Maytag 24 in.... • Answered on Sep 15, 2010
0helpful
1answer

My Maytag MDB6000AWW is leaving

Hi,
Yes,

Check your heating element..
A bad heating element causes many problems in dishwashers...

Dishwasher Problems The Heating Element not Working

Dishwasher Maintenance

heatman101

Asker's Testimonial " explanation very clear. will give it a go and seehow simple it was. thanks Ronnie " - ronnieshomes
9/15/2010 1:58:13 AM • Maytag 24 in.... • Answered on Sep 15, 2010
0helpful
1answer

Leaving a white film on


Hi,
Check your heating element..


A bad heating element causes many problems in dishwashers…

Dishwasher Problems The Heating Element not Working

Dishwasher Maintenance

heatman101

Asker's Testimonial " explanation very clear. will give it a go and see how simple it was. thanks Ronnie " - ronnieshomes


9/7/2010 2:58:25 AM • Maytag 24 in.... • Answered on Sep 07, 2010
Not finding what you are looking for?
Maytag 24 in. MDB5600A Jetclean II Built-in Dishwasher Logo

259 questions posted

Ask a Question

Usually answered in minutes!

Top Maytag Dishwashers Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Brad Brown

Level 3 Expert

19187 Answers

Paul Bade

Level 3 Expert

1818 Answers

Are you a Maytag Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Maytag Dishwashers

  • Maytag Dishwashers

Most Popular Question

maytag quiet series 300 not cleaning

  • Dishwashers
Loading...