20 Most Recent Jabra BT350 Bluetooth Headset Headset - Page 7 Questions & Answers

how do I set up the phone to discover jabra vbt185z?

ok i finally found out.. Turn on the jabra unit once on hold the answer button AND the volume up button at same time till u get solid blue light... It will flash like 8 times then go solid... At that point it can b found by all ur devices... the passcode is 0000... Enjoy

It should be 0000, unless they changed the code

setting my bluetooth up with a sprint phone

should be . all Bluetooth devices should be compatible i believe.

try holding call button down for 10 seconds on that one, it shold start blinking, than remove your thumb as soon as it starts blinking, to turn it off reverse the process, remember passkey is 0000 or 1234. good luck

Make sure your cell phone's bluetooth is activated. Once you do that, you should be able to hold down the main button on the Jabra and once it turns on, it will connect with your phone.

Also, go to this site for Jabra. It links directly to the manual.

http://www.jabra.com/sites/Jabra/GNimages/Products/WirelessHeadset/BT350/Documents/BT350_UM_AP_EN_650.pdf

This is your manual, you need adobe reader to see the pdf file,
it is a free download if you don't have it.


http://get.adobe.com/reader/otherversions/

0000

the battery needs replacing not really worth it

With headset off hold on button until solid light. Search for device. Use pairing code 0000 (4 zeros)

Make sure you have headset off. Then hold on button until light stays solid blue. This is pairing mode.. Have phone search for bluetooth device.. use pairing code 0000 (4 zeros)

You probably have auto answer turned on in your phone. The headset does not have this feature. You must find it in your phone to turn off auto answer while headset in use.

ps- second user- You canot use the phone handset with bluetooth device on. At least none that i know of.

http://www.jabra.com/Sites/Jabra/ap-en/headsetsupport/pages/Knowledgebase.aspx?kbid=784f9d0d-17f0-46fc-885d-dd402b7e7aae

maybe that can help?

Delete the problem unit off the phone's list then turn the phone off then back on. Next you will have to go through the pairing procedure for the headset again.

o.k. when its on charge is there a light on? after complete charge the light is suppose to go off. to get it to go on again push the call button till the light does come on. at least 6 seconds and than take it from there, its suppose to go on and blink. discover mode is solid light. pass key is 0000 or 1234. dont give up its a neat machine and it just takes a little patience.good luck

dude first of all you have to reset the passcode of your jebra bt350 then connect it from your parents mobile.


how to reset----
Press settings/connections/bluetooth/check both boxes; turn on, and make discoverable/click devices tab/turn the jabra off/then hold the ear button till the blue light is solid (not blinking)/click new partnership on the phone/click 0000 for the passcode. it should hook up.

You never said what model is your phone but the general practise is to pair the headset to the phone.how?? Make sure the headset is fully charged ,normally showing blue light depending on the brand. 1>While the phone is on ,press a button on the headset and it(headset)should show a blue light depending on the brand. 2>keep this button pressed and go to your phone's bluetooth configs and select a 'add audio divice' tab.The phone will search for for any headset in the vicinity till it finds yours. 3>Select your headset name shown on the phone and you could be required to enter password to pair,in this case most will be (0000)or (1234). Sorry had to be this long!!!!