20 Most Recent Jabra BT350 Bluetooth Headset Headset - Page 3 Questions & Answers

Hi and welcome to FixYa!

I'm afraid that the headset's circuit board is faulty that's why it's not functioning. It can be corroded which can cause failure on operation. It's better to purchase a new one rather than spending on repairing which will surely cost you.

Hope this helps and thank you for using FixYa! Have a good one!

1.Press and hold the Multifunction button in the middle of a boom headset while the headset is closed. The light will glow blue.2.Open the boom microphone and the blue light should remain on. If not, repeat step 1.
3.On the cell phone, press Menu > Settings > Connection > Bluetooth > Handsfree > New Device
4.Select BT350 once a connection is detected.
5.The passkey "0000" is now entered to confirm the connection has been made.
6.The cell phone screen will now read "Bluetooth Connection".

Tips:
1.Provided you set the Bluetooth power to "On" after the initial connection has been made, the phone will automatically re-connect to the headset.
2.To set the Bluetooth power on - Press Menu, Select Settings, then Connections, then Bluetooth link, scroll to Setup and select that. Scroll to Power and chose Change. Scroll to On and press Select. The screen should now read "Changed: Power On".
3.Test Your Connection: Close the headset and watch for cell phone to say "Disconnected". Re-open the headset and the phone should be connected automatically and will now display "Bluetooth Connected".

please give good rating if the solution works.
Thanks for using FixYa.

Try '0000' (four zeros).
Hope it works for you.
Please, let me know if you need further assistance.
Regards, Carlos

good day the problem that you have posted indicates that the mouth piece of your jabra bluetooth headset is deffective.

The passkey for this headset is "0000"

Try '0000' (four zeros).
Hope it works for you.
Regards, Carlos

The solid blue light simply means your headset is in pairing mode and ready to be connect to your phone.

Hi,
You can not turn it off from mobile you need to turn it off using the key on the headset.Press and hold that button for about 4 seconds it will switch off.
To pair the headset follow below instructions
Paring the JABRA head set to Mobile phone
1. Turn headset off. Press and hold until solid light comes on.
2. Activate Bluetooth on your phone.
3. Search for Bluetooth devices and select Jabra BT2070.
4. Press ‘OK’ on the phone ,If the phone asks for a PIN then confirm with PIN code 0000 (4 zeros)


Thank you

The headset has to be in learning mode first for any phone to find it, press and hold the power on button for 8 seconds until the power light comes on and stays on then search for it with your phone, pairing code can be 0000

Hi. The passkey will be 4 zeros 0000

HI. The passkey is simply 4 zeros. 0000

check first if it's fully charged. it might be drained.

Go to this site, and it will walk you through each step to connect your particular Jabra headset with your cellphone. Choose the headset, and then at the next page, choose your phone. Moving your mouse over each step will change the picture to what you should be seeing on your phone at each step.
http://jabra.pairx.co.uk/ Pls come back and let us know if this solved your problem.

User Manual

how do i sync my jabra(bt3010) to my lgtouch cell phone

0000 is d code

how can i connect jabra bt350 to my ipod touch 2g 3.1.3

Try this:
http://www.fixya.com/support/r5009033-put_most_bluetooth_headsets_into_pairing

Try deleting the headset from your phone and then re-pair from scratch.