Top 20 Jabra BT150 Wireless Headset Questions & Answers

Hi here you go: http://adcombhs.com/shopsite_sc/store/html/Jabra_BT150_Manual.pdf

Hello

Your bluetooth headset is powered by an internal battery. If the battery is not charged,it just won't turn on. Fully charge your battery before use.

Make sure that the power outlet you're using is working and that the cord is fitted correctly into the wall, PC or Car outlet and the Jabra Bluetooth device.

Try unplugging the Jabra Bluetooth device and see if it turns on. If so, use the Jabra Bluetooth device until the battery is completely exhausted. The next time you charge it, check that it is charging properly

If the Jabra Bluetooth device is still not charging, check what happens when you initially plug the Bluetooth device into its charger. If the light on the Bluetooth device flashes on and then off again quickly, it is likely that the battery is no longer working. Batteries cannot be replaced or covered warranty

You do need the passcode. It should "auto pair" but the default passkey or pin is 0000 (4 zeros.)

Here is a link to the user manual
http://www.jabra.com/sites/Jabra/GNimages/Products/WirelessHeadset/BT2010/Documents/UM/VBT185z_UM_6198.pdf

Headset Pairing Readiness Instructions:

1. Fully charge headset for two hours.

2. The headset will automatically go into pairing mode if no device has

been previously paired.

3. Set your mobile phone to 'discover Jabra VBT185Z'.
4. Enter passkey or PIN = 0000 (4 zeros), then press Yes or OK.

dw

You can pair BT150 with up to four phones or other bluetooth devices.
Before you pair it with a new phone, use the bluetooth menu on the phone it is currently paired with to disconnect it.

The passkey is 0000

First Fully charge the BT150. Turn BT150 on by pressing the "answer/end button". To put the BT150 into pairing mode press the answer/end and volume+ at the same time to activate pairing mode. Next Set your mobile phone to detect a Bluetooth device. Press yes or ok to pair phone with Jabra BT150. Put in pass key 0000 (four zeros) Then press yes or ok. Your phone will confirm when pairing is complete. Enjoy your earbud/headset.

The passkey is 0000.

Unfortunately you can't really replace the battery in that unit, once it dies it's pretty much gone. You would need to break open the case to get to the battery which of course renders the whole piece useless. On top of that a new battery would be around $15 for that style battery, and you can get a whole brand new "Samsung" bluetooth unit for $17.89 with free shipping here:

http://www.amazon.com/gp/product/B001UCELX4?ie=UTF8&tag=dependascient-20&linkCode=as2&camp=1789&creative=390957&creativeASIN=B001UCELX4

Please make sure you rate my answer 4 thumbs up, it is extremely important to me. I would be forever grateful if you could do so. If you need more help on this question please just respond to my answer here and I will get right back to you.


Thanks
Tim

Hello,it's either you experiencing a bad network problem or probably your jabra wireless headset is having a partial contact,would advice you use another headset on your phone to see if the problem persist.
wish you good luck,

take care.

Use the AC adapter to charge from a power socket.
The charging socket is located at the top of the headset (the wider end). When the LED is solid blue, your headset is charging. When the solid blue LED turns off, it is fully charged.

If it's like any other blue tooth the default is "0000" all zero's not o's

should be 0000 or 0001

Yes, just make sure the phone model you are specifically looking at has bluetooth capability. As long as it does (and practically every phone out nowadays does) then you definitely will be able to use a Jabra bluetooth unit with it. Bluetooth is pretty universal, as long as both devices (the headset and the phone) have bluetooth it will definitely work. I can confirm for sure it will work for you.

Please make sure you rate my answer 4 thumbs up, it is extremely important to me. I would be forever grateful if you could do so. If you need more help on this question please just respond to my answer here and I will get right back to you.


Thanks
Tim

Go to this site, and it will walk you through each step to connect your particular Jabra headset with your cellphone. Choose the headset, and then at the next page, choose your phone. Moving your mouse over each step will change the picture to what you should be seeing on your phone at each step.
http://jabra.pairx.co.uk/ Pls come back and let us know if this solved your problem.

Go to this site, and it will walk you through each step to connect your particular Jabra headset with your cellphone. Choose the headset, and then at the next page, choose your phone. Moving your mouse over each step will change the picture to what you should be seeing on your phone at each step.
http://jabra.pairx.co.uk/ Pls come back and let us know if this solved your problem.

go to the menu on your phone select manage connections turn on bluetooth then you'll see search, listen, etc. position on search don't press yet
get your ear piece ready: press the on button and hold it until you see a solid blue light (not blinking but solid) if it blinks try again until you get a solid blue light (it takes about 5-8 seconds) when that happens go to your phone and press search it will look for devices (it may find several) look for your earpiece model and select it
it will ask for a code or passkey, type 0000. Then it's going to ask if you want to bond or pair click yes and it will connect
check on the connection manager again and your bluetooth should be on and connected.


if it works for you, don't forget to rate me

thx

Pass key cannot be changed, Default pass key is set to "0000" for all bluetooth headsets.

Do thew same pairing process over again. Detailed article here eHow

If i remember correctly, turn it off, hold the up volume button, then hold the power button as well. Hold them until about 8 secs after the light comes on, when you should see the light go solid blue, and possible blink from red to blue, either of these means your in pairing mode.

GOOD LUCK AND PLS RATE THIS POST!!!!

its a kind of virus prob plz scan ur cell