Top 20
Nikon LS-9000 Film Scanner Questions & Answers
Getting true color on slide scans
Make sure you have the emulsion (image) side of the slide towards the scanner sensor. Some scanners have a special setting for film still in slide holders to correct for focus. You may need a photo edit program to help with color and density. I find no difference from 35mm to split 5x7s altho bigger is always better.
No thumbnail preview
Sorry , I don't know the answer to your problem , But I am experiencing sort of the same problem. When I place an image in the scanner , I do not see any preview thumbnails at all. I also do not see any of the preliminary questions as to the film format size or single or batch scanning. Nothing like that at all. I have called the tech's at Nikon and the scanner passes their over the phone examination. It appears my scanner is not been recognized by my computer ( I have tried both ) . Nikon suggested replacing the firewire cable which I did and still no preview thumbnails. I believe the problem is in the firewire interface panel ( where you plug the scanner in ) and I think this is where your problem lies also. It is a simple fix 5 maybe 6 screws. Getting the part number has been my problem. Nikon wants you to send in the entire scanner and have a flat $400 service charge . I'm sure the part is less than $400. Any ideas as to where to get the parts catologue ?? Let me know.
Nikon coolscan 9000
Close the scan program --turn off and unplug the scanner---plug the LS9000 back in and turn it on----reopen the scan program--this is my method on my LS-8000--It does this quite often !
The negative mount is jammed
Removed the outer cover - remove the screws on back and bottom then slide it off. Re-latch the tray cover.
I hope this helps. Let me know if you need further assistance.
After working correctly for several
Hi,
So, you tried to reinstall the drivers ?
http://h10025.www1.hp.com/ewfrf/wc/g...reitem=sj655czCan you see the scanner in Device Manager? Click on Start, right click on My Computer, then choose Properties... . Click on the Hardware tab, then click on Device Manager. Look for any ?'s or !'s that you see. Or, check for the scanner under Imaging Devices. Do you at least see the scanner device? If you do, then you've at least narrowed it down to perhaps an application issue.
What
error messages do you get when you try to scan?
Thanks
LS400 works ok after re-boot
That means that the USB turns off when you go to hibernate. This means that the USB port is configured to turn off when you go into hibernate to save power but does not come on. This can be chagned in the control panel then power options or power management. So that I can give you more specific instructions kindly provide me with the type of windows that you are using as well as the brand and model of your computer.
Nikon coolscan 3 LS30
This can be a software issue , so better check if there's any software update go ahead update the software of this and that should fix it..
Hope that helps........
WE HAVE A NIKON CAMERA
Hi
Some printing is get struck while printing please try with cancel that printing otherwise restart both the system and printer it will solve your problem
Boopathy.T
How do these points equate to money?
No money ever!
There is no payment made for answers on Fixya, points don't mean prizes, they are just for fun.
ADMIN Andrew
- Answers: 65,820 and not a penny per Answer.
Head over to
www.justanswer.com they pay lots of money because they charge for people to ask a question.
..
Not finding what you are looking for?