Logitech Stereo 350 Headset - Answered Questions & Fixed issues

re instal the usb port and configure the port

If you mean you pluged your headphones into your stereo jack and the stereo has no more sound the switch in the stereo jack may be stuck. If you can plug the headphones in still and get sound out of them then this is most likely the problem.
If thats not what you meant then please clarify your question with more details.
I hope this helps you,
Please Rate and Vote for me if this helps you,
Thank You,
ETRONIC

my friend cannot hear my sound but i can hear them

If its usb uninstall and then reinstall the drivers

Get another headset,,,,its ur mic....I should noe,,,i play cs a lot,,,,,I usually go through some headsets,,haha

Thanks for your help. The person that helped was knowledgeable and understood the problem. We quickly addressed the problem and was solved within a few short minutes.

The settings on my laptop needed to be changed and that solved the problem.
It is working fine now.

I would like to be updated on products related to softphone and skype use.
since i spend most of my working hours on both it's important to have the best headsets that are comfortable and cancel out outside noise.

Thanks again, John

Start on the Mac side by checking your sound input preferences. Do this by selecting under the apple pull down menu: System Preferences. Then get to the screen where you see all preferences icon's shown and select Sound. Once in the Sound preferences, select Input. Where is says "Select a device for sound input:" It is probably set to USB audio device since that worked for you. Look for Bluetooth Audio Device or similar name for your headset and select it. Speak into the h760 and adjust the input volume, you should see the input level go up when you speak. If not, your H760 bluetooth device is not properly paired. If your device does not show up, back up to the System Preferences page and select Bluetooth and follow instructions there. If that all is working but does not work in Parallels, inspect Parallels for Sound Input options and try to find your bluetooth device. Also check Windows sound input control panel to see that bluetooth is selected. Hope this helps.

is the minijack plug compatable with your mike

if you followed the instructions and doesn't work return to place of purchase for refund or replacement

easier to just replace the cable.

If you do not have the Bluetooth dongle (plugs into a USB port) you should contact Logitech for a replacement. Alternatively you can also look for one second hand via craigslist, ebay, etc.etc.

Did you ever find an answer to this? We have had a couple of agents have this happen to them also just this week. I would like to know if it's the headset or something else.

contact the manufacturer for assistance

I had the exact same problem. Boombox flashing blue, but not rapidly flashing blue. I did two things that seemed to fix it:1: Reset the device by switching it on, then holding both volume up and volume down buttons at the same time for 10 seconds. The blue flashing light will briefly flash quicker to confirm.2: Switch off the boom box3: Switch on using the power button and (very important) immediately press and hold the Bluetooth button. The Bluetooth button needed pressing and holding almost instantaniously after the power button for it to work for me. I had to try several times to get it to work.When you do this successfully, the Bluetooth light starts flashing rapidly and it enters search mode.I nearly threw my speakers away, now it works and connects fine :)

The soft clicking noises could happen for many reasons such as moving your headset around, tapping on any part of the headset or even the wire, but if it's for none of these reasons, then it could be because of a loose wire.

samsung ear speaker not working

The "trident" represents the outline of a speaker. Often, on will have a '+' sign next to it, an the other has a '-'. These, respectively increase and decrease the volume. The one with a cross through it mutes all sound. Pressing it again will restore sound.

Go to heighest building in your city and throw it

Sounds like its a loose connection inside the headset itself. this will happen. It could either be on the plug or in the headphone itself. An from experience its more of a hassly trying to fix it then its worth.

the problem is from the mouthpiece of the headset,since its a newly acquired headset,its better you don't tamper with it techniclly,i will advice you return it to the point of purchase for a replacement,i believe it has a warranty